Jump to the main content block

 

專任教師

  • 職稱
    教授
  • 姓名
    胡毓忠
  • 電子郵件
  • 聯絡電話
    03-9317469#
  • 授課領域
    工業感測器與感測電路設計; 半導體製程技術概論; 生物機電系統概論; 科技管理概論; 振動與波動物理; 氣液壓控制工程; 動力學; 基礎振動學; 專案計畫撰寫與管理; 普通物理; 微機電學; 微積分; 新能源工程; 熱力學; 機械結構振動學; 靜力學; 聲音與振動控制技術
  • 研究專長
    微機電系統; 機械固力; 智慧機械/製造; 工業感測器
學校 主修 學位 國別
國立台灣科技大學 機械工程 博士 中華民國
國立台灣科技大學 機械工程 碩士 中華民國
中原大學 機械工程 學士 中華民國
服務機關 服務部門 職稱 起訖年月
國立宜蘭大學 研究發展處 研發長 2015/08/01~2016/07/31
國立宜蘭大學 機械與機電工程學系(所) 主任 2011/08/01~2015/07/31
國立宜蘭大學 機械與機電工程學系(所) 機械與機電工程學系(所) 副教授 2008 年 08 月 至 2010 年 01 月
華梵大學 機電工程學系 機電工程學系 副教授且兼任系主任 2007 年 08 月 至 2008 年 07 月
華梵大學 機電工程學系所 副教授 2006 年 08 月 至 2007 年 07 月
華梵大學 機電工程學系 助理教授 2003 年 10 月 至 2006 年 07 月
華梵大學 機電工程學系 兼任助理教授 2003 年 08 月 至 2003 年 09 月
國立台灣大學 應用力學研究所 國防役博士後研究 1999 年 06 月 至 2003 年 10 月
類別 獲獎日期 名稱 國別 頒獎單位 獎助金額
校內 2023/10/16 112年度研究績優獎 中華民國 研發處 80000
校內 2023/10/02 112年度研究績優教師 中華民國 研發處
校內 2022/10/16 111年度國科會大專校院研究獎勵 中華民國 研發處 120000
校內 2021/10/18 110年度科技部大專校院研究獎勵 中華民國 科技部 120000
校內 2020/07/28 109年度科技部大專校院研究獎勵 中華民國 科技部 119160
校外 2018/12/08 Best paper award 中華民國 Chinese Institute of Automation Engineers
校外 2018/03/24 上銀機械碩士論文獎佳作 中華民國 上銀科技教育基金會 100000
校外 2017/11/09 106年度科技部工程技術研究發展司產學成果海報展示特優獎 中華民國 科技部
校外 2017/09/30 2017第三屆旭泰科技論文獎旭泰銅獎 中華民國 旭泰精密機械股份有限公司 25000
校外 2017/05/28 最佳論文獎 China International Society of Mechatronic Engineering
校外 2016/11/09 科技部自動化學門104年度專題計畫成果發表會海報展覽競賽佳作獎 中華民國 科技部
校外 2014/12/06 中國機械工程學會服務貢獻獎 中華民國 中國機械工程學會
校內 2012/11/06 工學院教學傑出教師 中華民國 工學院
校內 2012/11/06 教學傑出教師 中華民國 教學發展中心 30000
校外 2012/10/08 101年度國科會自動化學門成果發表會,成果海報競賽佳作獎 中華民國 國科會
校外 2012/08/16 Distinguished Student Poster Paper 美國 Society of Information Display
校內 2011/09/27 工學院研究績優獎 中華民國 工學院
校內 2011/03/14 99年度大專校院獎勵特殊優秀人才 中華民國 行政院國家科學委員會 120000
學年期 課程名稱
1131 動力學
1122 靜力學
1121 動力學
1112 靜力學
1111 動力學
1111 基礎振動學
年度 篇名 期刊等級 期刊名稱 第一作者 共同作者 卷期 起始頁 結束頁 總頁數 語言 相關網址
2023 AI-Powered Blockchain Technology for Public Health: A Contemporary Review, Open Challenges, and Future Research Directions SCI healthcare Ritik Kumar Arjunaditya, Divyangi Singh, Kathiravan Srinivasan, Yuh-Chung Hu Vol. 11 81 0 0
2023 Computational Intelligence in Cancer Diagnostics: A Contemporary Review of Smart Phone Apps, Current Problems, and uture Research Potentials SCI diagnostics Somit Jain Dharmik Naicker, Ritu Raj, Vedanshu Patel, Yuh-Chung Hu, Kathiravan Srinivasan, Chun-Ping Jen Vol. 13 1563 0 36
2023 Impact of Cross-Validation on Machine Learning Models for Early Detection of Intrauterine Fetal Demise SCI diagnostics Jayakumar Kaliappan Apoorva Reddy Bagepalli, Shubh Almal, Rishabh Mishra, Yuh-Chung Hu, Kathiravan Srinivasan Vol. 13 1692 0 22
2023 Leveraging Computational Intelligence Techniques for Diagnosing Degenerative Nerve Diseases: A Comprehensive Review, Open Challenges, and Future Research Directions SCI diagnostics Saransh Bhachawat Eashwar Shriram, Kathiravan Srinivasan, Yuh-Chung Hu Vol. 13 288 0 31
2023 Maximum Power Development under Varying Solar Radiation Based on Hysteresis-loop Comparison of Selected Duty-cycle Perturbation Algorithms on a Mobility Scooter SCI Journal of Network Intelligence Yi-Jui Chiu Wen-Zhi Wang, Yuh-Chung Hu, Shui-Yang Lien, Bing-Rong Zhang, Vol. 8, No. 4 1540 1556 0
2023 On the robustness and generalization of thermal error models for CNC machine tools SCI The International Journal of Advanced Manufacturing Technology Po‑Han Chen Pei‑Zen Chang, Yuh‑Chung Hu, Tzuo‑Liang Luo, Chun‑Yu Tsai, Wei‑Chang Li Vol. 130 1635 1651 17
2023 Optimization and Design of Driverless Vehicle Software System Based on Image Recognition SCI Journal of the Chinese Society of Mechanical Engineers Bi Li Yi-Jui Chiu, Cai-En Weng, Yuh-Chung Hu, Bing-Rong Zhang, Ji-Ming Yi, Sheng-Rui Jian Vol. 44, No. 2 165 178 14
2022 A Contemporary Review on Utilizing Semantic Web Technologies in Healthcare, Virtual Communities, and Ontology-Based Information Processing Systems SCI Electronics Senthil Kumar Narayanasamy Kathiravan Srinivasan, Satish Kumar Masilamani, Kuo-Yi Huang 11, 453 0 0 29
2022 A Joint Resource Allocation, Security with Efficient Task Scheduling in Cloud Computing Using Hybrid Machine Learning Techniques SCI Sensors Prasanta Kumar Bal Sudhir Kumar Mohapatra, Tapan Kumar Das, Kathiravan Srinivasan 22,1242 0 0 16
2022 A Systematic Review on Machine Learning and Deep Learning Models for Electronic Information Security in Mobile Networks SCI Sensors Chaitanya Gupta Ishita Johri, Kathiravan Srinivasan, Yuh-Chung Hu, Saeed Mian Qaisar, Kuo-Yi Huang 22,2017 0 0 34
2022 AI-Powered Blockchain Technology for Public Health: A Contemporary Review, Open Challenges, and Future Research Directions SCI Healthcare Ritik Kumar Arjunaditya, Divyangi Singh, Kathiravan Srinivasan 11, 81 0 0 32
2022 An Optimization Algorithm of Time-Delayed Feedback Control Parameters for Quarter Vehicle Semiactive Suspension System SCI Mathematical Problems in Engineering Yong Guo Chuan-Bo Ren 2022, 2946091 0 9
2022 Effective Preprocessing and Normalization Techniques for COVID-19 Twitter Streams with POS Tagging via ightweight Hidden Markov Model SCI Journal of Sensors Senthil Kumar Narayanasamy Saeed Mian Qaisar, Kathiravan Srinivasan 2022, 1222692 0 0 14
2022 Recent Advances in Evolving Computing Paradigms: Cloud, Edge, and Fog Technologies SCI Sensors Nancy A Angel Dakshanamoorthy Ravindran, P M Durai Raj Vincent, Kathiravan Srinivasan 22, 196 0 0 38
2021 A Smart Tool Holder Calibrated by Machine Learning for Measuring Cutting Force in Fine Turning and Its Application to the Specific Cutting Force of Low Carbon Steel S15C SCI Machines Liang-Wei Tseng 9, 190 0 0 19
2021 Automatic Hate Speech Detection in English-Odia Code Mixed Social Media Data Using Machine Learning Techniques SCI Applied Sciences Sudhir Kumar Mohapatra 11, 8575 0 0 21
2021 Contemporary Progresses in Ultrasonic Welding of Aluminum Metal Matrix Composites SCI Frontiers in Materials Senthil Kumaran Selvaraj 8, 647112 0 0 13
2021 Dynamic Characteristics of Microring Driven by the Symmetrically Distributed Electrostatic Force SCI Complexity Qingheng Meng Yuanlin Zhang, Jin Wei, Yan Shi, Tao Yu 2021 0 0 12
2021 Fluid–Structure Coupling Effects in a Dual U-Tube Coriolis Mass Flow Meter SCI Sensors Yuh-Chung Hu Zen-Yu Chen, Pei-Zen Chang 21, 982 0 0 30
2021 Performance Assessment of Certain Machine Learning Models for Predicting the Major Depressive Disorder among IT Professionals during Pandemic times SCI Hindawi Computational Intelligence and Neuroscience P. M. Durai Raj Vincent 2021 0 0 12
2021 Recent Advances in Evolving Computing Paradigms: Cloud, Edge, and Fog Technologies SCI Sensors Nancy A Angel 22 0 0 38
2021 The Thermal Error Estimation of the Machine Tool Spindle Based on Machine Learning SCI Machines Yu-Cheng Chiu 9,184 0 0 0
2021 Vibrations of Rotating Ring Under Electric Field SCI Journal of the Chinese Society of Mechanical Engineers Tao Yu Jiange Kou Vol.42, No.1, 51 62 12
2019 Thermal-Feature System Identification for a Machine Tool Spindle SCIE Sensors Yuh-Chung Hu Ping-Jung Chen, Pei-Zen Chang 19 1209 0 24
2018 Parameter Estimation of the Thermal Network Model of a Machine Tool Spindle by Self-made Bluetooth Temperature Sensor Module SCIE Sensors Yuan-Chieh Lo Pei-Zen Chang 18 656 0 20
2018 Vibration of a Rotating Micro-Ring under Electrical Field Based on Inextensible Approximation SCIE Sensors Tao Yu Jiange Kou 18 2044 0 13
2016 A Novel Measurement System for Mechanical Parts SCI Sensors and Materials Kuo-Yi Huang Mu-Tian Yan, Liang-Shun Chang Vol. 28, No. 9 1043 1051 9
2015 A Flexible Polyvinylidene Fluoride Film-Loudspeaker SCI Journal of the Chinese Society of Mechanical Engineers Yi-Ta Wang Vol.36, No.1 59 66 8
2015 High power Co3O4/ZnO p–n type piezoelectric transducer SCI Thin Solid Films Yuh-Chung Hu Vol. 584 112 115 4
2015 The Fringe-Capacitance of Etching Holes for CMOS-MEMS SCI Micromachines Yi-Ta Wang Vol. 6 1617 1628 12
2014 A METHOD INTEGRATING OPTIMAL ALGORITHM AND FEM ON CMOS RESIDUAL STRESS SCI Journal of Mechanics W.-C. Chuang David T.-W. Lin, H.-L. Lee, C.-H. Cheng, P.-Z. Chang, N.-B. Quyen Vol. 30, No. 2, 123 128 6
2014 Enhance the Pyroelectricity of Polyvinylidene Fluoride by Graphene-Oxide Doping SCI Sensors Yuh-Chung Hu Wei-Li Hsu, Yi-Ta Wang, Cheng-Tao Ho, Pei-Zen Chang 14 6877 6890 14
2014 The Stiffness Variation of a Micro-Ring Driven by a Traveling Piecewise-Electrode SCI Sensors Yingjie Li Tao Yu 14 17256 17274 19
2013 A Solution Processed ZnO Thin Film EI Applied Mechanics and Materials Yuh-Chung Hu David T.W. Lin, Hai-Lin Lee, Pei-Zen Chang Vols. 239-240 1585 1588 4
2013 On the Dynamics of a Micro-beam Driven by a Traveling Harmonic Force EI Advanced Materials Research Wei-Hsiang Tu Pei-Zen Chang, Chih-Kung Lee Vol. 740 581 585 5
2013 The Improvement of Parameters of Manufacturing Process on Flexible Surface Acoustic Wave Device EI Applied Mechanics and Materials Tsung Chi Hsieh Kuan-Ju Chen, David T. W. Lin, Yang Der Juang Vols. 321-324 532 535 4
2013 The Innovated Flexible Surface Acoustic Wave Devices on Fully InkJet Printing Technology EI Smart Science Chao-Kuang Chen David T.W. Lin, Yung-Der Juang, Yen-Ting Kuo, Chu-Yu Chen Vol. 1, No. 1, 13 17 5
2013 以噴墨印刷製作可撓性焦電感測器 其他 微系統暨奈米科技協會會刊 胡毓忠 廖偉珈 29 40 52 13
2012 An analytical model for instant design of an LCD cell with photospacers under gravity and local loading SCI Journal of the SID Ling-Yi Ding Wen-Pin Shih, Mao-Hsing Lin, Pei-Zen Chang 20/3 148 155 8
2012 CMOS-MEMS Test-Key for Extracting Wafer-Level Mechanical Properties SCI Sensors Wan-Chun Chuang Pei-Zen Chang 12 17094 17111 17
2012 Effects of etching holes on complementary metal oxide semiconductor–microelectromechanical systems capacitive structure SCI Journal of Intelligent Material Systems and Structures Wei-Hsiang Tu Wen-Chang Chu, Chih-Kung Lee, Pei-Zen Chang 24(3) 310 317 8
2012 The Electromechanical Behavior of a Micro-Ring Driven by Traveling Electrostatic Force SCI Sensors Xiuqian Ye Yibao Chen, Da-Chih Chen, Kuo-Yi Huang 12 1170 1180 11
2012 The Optimization of the Thermal Response on the ZnO Flexible Pyroelectric Film Temperature Sensor SCI IEEE SENSORS JOURNAL David T. W. Lin Chin-Hsiang Cheng VOL. 12, NO. 2, 397 403 7
2012 The fringe capacitance formula of microstructures SCI JOURNAL OF MICROMECHANICS AND MICROENGINEERING Wan-Chun Chuang Chang-Wen Wang, Wen-Chang Chu, Pei-Zen Chang 22 25015 7
2011 On the Dynamics of the Micro-ring Driven by Traveling Bias Voltages EI Advanced Materials Research Xiuqian Ye Yibao Chen, Bih-Sheng Hsu, Yuh-Chung Hu 311-313 1027 1031
2011 Study on the heat transfer of the plate-fin heat sink under impinging jet cooling 其他 Progress in Computational Fluid Dynamics David T.W. Lin Hung-Yi Li, Yuh-Chung Hu 11(3/4) 237 245
2011 The Optimization of the Thermal Response on the ZnO Flexible Pyroelectric Film Temperature Sensor 其他 IEEE Sensors David T.W. Lin Yu Chung Hu, Chin-Hsiang Cheng
2010 A Flexible Proximity Sensor Fully Fabricated by Inkjet Printing SCI Sensors Chin-Tsan Wang Kuo-Yi Huang, David T.W. Lin, Wei-Chia Liao, Hua-Wei Lin, Yuh-Chung Hu 10(5) 5054 5062
2010 CMOS Compatible Electrochemical Process for Improving Quality Factor of Spiral Microinductors SCI Micro & Nano Letters Ling-Yi Ding Wen-Pin Shih, Yuh-Chung Hu, Yi-Jie Chen, Pei-Zen Chang 5(5) 266 269
2010 Exporing Power Generation of Single-Chamber Microbial Fuel Cell Using Mixed and Pure Cultures SCI Journal of the Taiwan Institute of Chemical Engineers Jing-Long Han Chin-Tsan Wang, Yuh-Chung Hu, Ying Liu, Wen-Ming Chen, Chang-Tang Chang, Hui-Zhong Xu, Bor-Yann Chen 41(5) 606 611
2010 Mixing of Liquids Using Obstacles in Y-Type Microchannels EI Tamkang Journal of Science and Engineering C. T. Wang Vol. 13, No. 4, 385 394 10
2010 Novel Biometric Flow Slab Design for Improvement of PEMFC Performance SCI Applied Energy Chin-Tsan Wang Yuh-Chung Hu, Pei-Lun Zheng vol. 87 1366 1375
2010 Review on the Modeling of Electrostatic MEMS SCI Sensors Wan-Chun Chuang Hsin-Li Lee, Pei-Zen Chang, Yuh-Chung Hu 10 6149 6171
2010 Some Design Considerations on the Electrode Layout of ZnO Pyroelectric Sensors SCI Sensors and Materials Chun-Ching Hsiao Yuh-Chung Hu, and Rwei-Ching Chang 22(8) 417 425
2009 Biophysical Micromixer SCI Sensors Chin-Tsan Wang Tzu-Yang Hu 9 5379 5389 11
2009 Electromechanical behavior of the curled cantilever beam SCI J. Micro/Nanolith. MEMS MOEMS Yuh-Chung Hu Chi-Yuan Lee, Wen-Pin Shih, Pei-Zen Chang 8(3) 33020 8
2009 Exploring threshold operation criteria of biostimulation for azo dye decolorization using immobilized cell systems SCI Bioresource Technology Bor-Yann Chen Chia-Yi Yen, Wen-Ming Chen, Chan-Tang Chang, Chin-Tsan Wang 100 5763 5770 8
2009 Integration of silicon micro-hole arrays as a gas diffusion layer in a micro-fuel cell SCI International Journal of hydrogen energy Chi-Yuan Lee Shuo-Jen Leea, Wen-Pin Shihc, Wei-Yuan Fana, Chih-Wei Chuang 34 6457 6464 8
2009 Real Time Monitoring of Temperature of a Micro Proton Exchange Membrane Fuel Cell SCI Sensors Chi-Yuan Lee Shuo-Jen Lee, Wen-Pin Shih, Wei-Yuan Fan, Chih-Wei Chuang 9 1423 1432 10
2009 Residual stresses and mechanical properties of a ZnO pyroelectric sensor SCI Theoretical and Applied Fracture Mechanics C.C. Hsiao C.K. Chao 52 1 6 6
2008 Fabrication of a ZnO Pyroelectric Sensor SCI Sensors Chun-Ching Hsiao Kuo-Yi Huang 8 185 192 8
2008 The fabrication of silicon-based PZT microstructures using an aerosol deposition method SCI JOURNAL OF MICROMECHANICS AND MICROENGINEERING Xuan-Yu Wang Chi-Yuan Lee, Yuh-Chung Hu, Wen-Pin Shih, Chih-Cheng Lee, Jung-Tang Huang, Pei-Zen Chang 18 55304 7
2007 A Closed Form Solution for the Pull-in Voltage of the Micro Bridge EI Tamkang Journal of Science and Engineering Yuh-Chung Hu Guan-De Lee Vol. 10, No. 2, 147 150 4
2007 A method for mechanical characterization of capacitive devices at wafer level via detecting the pull-in voltages of two test bridges with different lengths SCI JOURNAL OF MICROMECHANICS AND MICROENGINEERING Yuh-Chung Hu Wen-Pin Shih, Guan-De Lee 17 1099 1106 8
2007 An analytical model considering the fringing fields for calculating the pull-in voltage of micro curled cantilever beams SCI JOURNAL OF MICROMECHANICS AND MICROENGINEERING Yuh-Chung Hu Chung-Sheng Wei 17 61 67 7
2007 An approximate analytical solution to the pull-in voltage of a micro bridge with an elastic boundary SCI JOURNAL OF MICROMECHANICS AND MICROENGINEERING Yuh-Chung Hu Pei-Zen Chang, Wan-Chun Chuang 17 1870 1876 7
2007 Fabrication of micro nickel/diamond abrasive pellet array lapping tools using a LIGA-like technology SCI JOURNAL OF MICROMECHANICS AND MICROENGINEERING Sheng-Yih Luo Tsung-Han Yu 17 1130 1138 9
2007 Wafer-level microelectromechanical system structural material test by electrical signal before pull-in SCI APPLIED PHYSICS LETTERS Yuh-Chung Hu Po-Yuan Huang 90 121908 3
2006 Closed form solutions for the pull-in voltage of micro curled beams subjected to electrostatic loads SCI JOURNAL OF MICROMECHANICS AND MICROENGINEERING Yuh-Chung Hu 16 648 655 8
2006 Identification of material and geometrical parameters for microstructures by dynamic finite element model updating SCI Microsystem Technology Kun-Nan Chen Wei-Hsin Gau 12 736 745 10
2006 Mechanical Characterization of Thin Films by the Capacitance-Voltage Measurement of Microstructures SCI Materials Science Forum Yuh-Chung Hu Wei-Hsin Gau, Wei-Hsiang Tu Vols. 505-507 145 150 6
2006 Partial-electroded ZnO pyroelectric sensors for responsivity improvement SCI Sensors and Actuators A - Physical C.S. Wei Y.Y. Lin, C.W. Wu, C.K. Shih, C.T. Huang, S.H. Chang 128 18 24 7
2005 Nonlinear and linearized algorithms for the Young’s modulus extraction of thin films through the capacitance-voltage measurement of microstructures SCI JOURNAL OF APPLIED PHYSICS Yuh-Chung Hu Wei-Hsiang Tu 98 104504 6
2004 Some design considerations on the electrostatically actuated microstructures SCI Sensors and Actuators A - Physical Y.C. Hu C.M. Chang, S.C. Huang 112 155 161 7
2004 微機電系統與奈米科技 其他 科學發展月刊 李世光 378 56 61 6
2003 我國從MEMS到NEMS的發展策略 其他 科技發展政策報導 李世光 孫美芳 SR9201 1 10 10
2000 An Application of Constrained Layer Damping on the Cylindrical Shells Conveying FLuid SCI Journal of the Chinese Society of Mechanical Engineers Yuh-Chung Hu Shyh-Chin Huang 21(2) 189 200 12
2000 The frequency response and damping e€ect of three-layer thin shell with viscoelastic core SCI Computers and Structures Yuh-Chung Hu Shyh-Chin Huang 76 577 591 15
1999 Forced Response of Sandwiched Ring with Viscoelastic Core Subjected to Traveling Load SCI Journal of the Acoustic Society of America Yuh-Chung Hu Shyh-Chin Huang 106(1) 202 210 9
年度 名稱 研討會名稱 第一作者 共同作者 論文類型 語言 相關網址
2020 ROBOTIC GLUE INJECTION 2020 International Conference on Mechatronic, Automobile, and Environment Engineering Tsai-Cheng Lee Cheng-Siang Jhong, Yuh-Chung Hu 一般論文
2020 Use Machine Learning to Estimate The Thermal Error of High-Speed Spindle The 17th International Confernce on Automation Technology (Automation 2020) Ming-Che Shen Bo-Han Chen, Pei-Zen Chang, Yuh-Chung Hu 一般論文
2019 A Pneumatic Piezoelectric Power Harvester Embedded Under Insole for Converting Walking Energy into Electric Power 2019 International Conference on Consumer Electronics - Taiwan (2019 ICCE-TW) Yuh-Chung HU Ssu-Ting TSAI, Pei-Zen CHANG 一般論文
2019 A smart tool holder with force sensing function The 16th International Confernce on Automation Technology (Automation 2019) Yuh-Chung Hu Tzu-Sen Hung, Pei-Zen Chang 一般論文
2019 Estimation of the thermal-deformation of machine tool spindle The 16th International Confernce on Automation Technology (Automation 2019) Yuh-Chung Hu Chung-Hsuan Wu, Pei-Zen Chang 一般論文
2019 Method for Estimating the Internal Temperature of Machine Tool Spindle from Surface Temperature The 15th International Conference on Intelligent Unmanned Systems Yuh-Chung Hu David T.W. Lin, Chun-Ping Jen 一般論文
2019 The Multi-Physics Simulation of a Straight-Tube Coriolis Mass Flowmeter 2019 International Conference on Mechatronic, Automobile, and Environment Engineering Yuh-Chung Hu Zan-Yu Chen, Pei-Zen Chang 一般論文
2018 A Formula For Evaluating The Mass Flowrate Of Coriolis Mass Flowmeter 2018 International Conference on Mechatronic, Automobile, and Environmental Engineering Yuh-Chung Hu Cheng-Yu Hsieh, Pei-Zen Chang 一般論文
2018 A total solution to the thermo-feature identification of a machine tool spindle The 15th International Confernce on Automation Technology (Automation 2018) Yuh-Chung Hu Ping-Jung Chen, Pei-Zen Chang 一般論文
2017 A BLUETOOTH TEMPERATURE SENSOR MODULE 2017 International Conference on Mechatronic, Automobile, and Environment Engineering Yuh-Chung Hu Yuan-Chieh Lo, Pei-Zen Chang, Ching-Liang Dai 一般論文
2017 A CONDENSER MICROPHONE MODEL 2017 International Conference on Mechatronic, Automobile, and Environment Engineering Yuh-Chung Hu Fu-Lin Jian, Ping-Jung Chen, Pei-Zen Chang 一般論文
2017 AN ANALYTICAL MODEL OF A STRAIGHT-PIPE CORIOLIS MASS FLOWMETER 2017 International Conference on Mechatronic, Automobile, and Environment Engineering Yuh-Chung Hu Ye-Ting Tsau, Cheng-Yu Hsieh, Pei-Zen Chang 一般論文
2017 Parameter estimation of the Thermal Network Model of a Machine Tool Spindle by Self-made Bluetooth Temperature Sensor Modules 2017 The 3rd International Conference on Inventions (ICI 2017) Yuan-Chieh Lo Pei-Zen Chang 一般論文
2017 SIMULATION ON THE CUTTING TORQUE OF A SMART TOOLHOLDER 2017 International Conference on Mechatronic, Automobile, and Environment Engineering Yuh-Chung Hu Jia-Ming Chang, Pei-Zen Chang
2017 The Flow-Structure Interaction of Coriolis Mass Flowmeter The 13th International Conference on Intelligent Unmanned Systems Yuh-Chung Hu Cheng-Yu Hsieh, Pei-Zen Chang 一般論文
2016 An optical measurement system for plantar pressure and arch index The 1st International Conference on Engineering and Science (ICES 2016) Yuh-Chung Hu Yuh-Chung Hu, Ki-Rin Wu, Yan-Tin Chu 一般論文
2016 Bi與FePc應用於生物-電-芬頓燃料電池之特性研究 第十屆海峽兩岸材料腐蝕與防護研討會 王宜達 王宜達、盧家彥、胡毓忠 一般論文
2016 Characterization of Protein Binding Force by Utilizing Shear Stress inside Microchannel 2016 International Congress on Engineering and Information (ICEAI 2016) Chi-Yu Chen Chi-Yu Chen, Wen-Pin Shih, Yuh-Chung Hu 一般論文
2016 FePc複合CNT於不銹鋼電極應用於生物-電-芬頓燃料電池之研究 第十屆海峽兩岸材料腐蝕與防護研討會 王宜達 王宜達、王瑞翔、胡毓忠 一般論文
2016 Simulation on Coriolis mass flowmeter The 1st International Conference on Engineering and Science (ICES 2016) Yuh-Chung Hu Yuh-Chung Hu, Fu-Hsien Wu 一般論文
2016 The experimental study of heat extraction of supercritical CO2 in the geothermal reservoir 2016 3rd International Conference on Chemical and Biological Sciences Cyun-Jie Huang Cyun-Jie Huang, Jui-Ching Hsieh, David T. W. Lin, Jenn-Kun Kuo, Yuh-Chung Hu 一般論文
2016 The optimization of fused deposition modeling process by Taguchi method The 1st International Conference on Engineering and Science (ICES 2016) Yuh-Chung Hu Yuh-Chung Hu, Meng-Chien Chen, Yu-Yang Fang 一般論文
2016 The zincoxide deposition by inkjet printing The 1st International Conference on Engineering and Science (ICES 2016) Yuh-Chung Hu Yuh-Chung Hu, Jian-Neng Chen, Jhang-Wei Kal 一般論文
2016 Wiring the tin-silver-copper alloy by fused deposition modeling 2nd International Conference on Innovative Design, Analysis and Development Practices Aerospace and Automotive Engineering (I-DAD 2016) Yuh-Chung Hu
2016 管流結構振動的理論分析與應用 第十屆海峽兩岸航空航天學術研討會 胡毓忠 胡毓忠、曹葉廷、張明輝、張培仁 一般論文
2015 Fabrication of ZnO Thin Film Sensor for CO2 Monitoring 2015 4th International Conference on Informatics, Environment, Energy and Applications David T.W. Lin David T.W. Lin, You-Peng Yuan, Yuh Chung Hu 一般論文
2015 Simulation on the resonant cavity of microphone 2015 International Academic Conference on Engineering, Technology and Innovations (IACETI 2015) Yuh-Chung Hu Yuh-Chung Hu, Fu-Lin Jian, Pei-Zen Chang, David T.W. Lin, Jenn-Kun Kuo 一般論文
2015 以熔融沉積成型錫銀銅系合金導線 中國機械工程學會第三十二屆全國學術研討會 胡毓忠 胡毓忠、王宜達、吳修賢、謝毅基 一般論文
2014 The Electromechanical Behavior of a Micro-Beam Driven by Traveling Electrostatic Force 2014 International MultiConference of Engineers and Computer Scientists Yuh-Chung Hu Yuh-Chung Hu, Wei-Hsiang Tu, Pei-Zen Chang, Chih-Kung Lee, David T.W. Lin, Chung-Neng Huang 一般論文
2014 具屋頂水塔的智慧型家庭用水系統設計 中國機械工程學會第三十一屆全國學術研討會 徐信義 徐信義, 胡毓忠 一般論文
2014 飛輪動能回收系統應用於複合式燃料電池車之研究 2014 Conference on Precision Machinery and Manufacturing Technology (PMMT 2014) 郭振坤 郭振坤,謝享桂,黃俊硯,林大偉,黃崇能,胡毓忠 一般論文
2013 A Low-Frequency Vibration Energy Harvester The 12th International Conference on Automation Technology (Automation 2013) Tsung-Han Lee Tsung-Han Lee, Yuh-Chung Hu, Pei-Zen Chang 一般論文
2013 Flexible proximity key-panel 2013 8th IEEE International Conference on Nano/Micro Engineered and Molecular Systems (NEMS), YC Hu YC Hu, CT Ho, PZ Chang 一般論文
2013 On the Dynamics of a Micro-beam Driven by a Traveling Harmonic Force 2013 International Conference on Materials, Mechatronics and Automation (ICMMA 2013) Wei-Hsiang Tu Wei-Hsiang Tu, Pei-Zen Chang, Chih-Kung Lee, Yuh-Chung Hu 一般論文
2013 The Heat Exchanger of Heat Pipe Study for Ground Source Heat Pump 2013 Conference on Precision Machinery and Manufacturing Technology-PMMT 2013 Long-Der Shin Long-Der Shin, Jui-Ching Hsieh, David Ta-Wei Lin, Yuh-Chung Hu 一般論文
2013 The Improvement of Parameters of Manufacturing Process on Flexible Surface Acoustic Wave Device 2013 International Conference on Mechatronics and Industrial Informatics Tsung Chi Hsieh Tsung Chi Hsieh, Kuan-Ju Chen, David T. W. Lin, Yang Der Juang, Yuh Chung Hu 一般論文
2013 The study of the performance of the acetone and aluminum flat plate heat pipe International Conference on Advance Research in Mechanical, Aeronautical And Civil (ICARMAEC 2013) Jui-Ching Hsieh Jui-Ching Hsieh, David T.W. Lin, Yuh-Chung Hu, Chung-Neng Huang, Wei-Mon Yan 一般論文
2013 Vibration of a PVDF Film-Loudspeaker The 16th International Conference on Advances in Materials & Processing Technologies Hu Yuh-Chung Hu Yuh-Chung, Chen Kuan-Ru, Chen Da-Chih 一般論文
2012 A Solution Processed ZnO Thin Film 2012 International Conference on Measurement, Instrumentation and Automation Yuh-Chung Hu Yuh-Chung Hu, David T.W. Lin, Hai-Lin Lee, Pei-Zen Chang 一般論文
2012 Analysis of Gravity Mura under Thermal Expansion of LCD Cells SID Symposium Digest of Technical Papers JC Li JC Li, LY Ding, WP Shih, MH Lin, YC Hu, PZ Chang 一般論文
2011 A fringing capacitance model for electrostatic microstructure The 13th International Congress on Mesomechanics WC Chuang WC Chuang, YC Hu, CW Wang, WC Chu, PZ Chang 一般論文
2011 Etching holes effects on CMOS-MEMS capacitive structure ICAST2011: 22nd International Conference on Adaptive Structures and Technologies Wei-Hsiang Tu Wei-Hsiang Tu, Wan-Chun Chuang, Wen-Chang Chu, Chih-Kung Lee, Pei-Zen Chang, Yuh-Chung Hu 一般論文
2011 Fringe Capacitance Analysis for Micro Devices Third International Symposium on Computational Mechanics (ISCM III) Yuh-Chung Hu Yuh-Chung Hu, Zhong-Hua Ou, and Pei-Zen Chang 一般論文
2011 Humanoid eye robot with angle control and image registration 2011 IEEE International Conference on Robotics and Biomimetics (ROBIO) Bo-Jiun Chen Bo-Jiun Chen, Sheng-Fan Wen, Gun-Hwa Liu, Ya-Yun Lee, Wen-Pin Shih, Ching-Liang Dai, Yuh-Chung Hu 一般論文
2011 Instant design criteria for LCD cell with photospacers under gravity and local loading using Winkler model SID Symposium Digest L. Y. Ding L. Y. Ding, W. P. Shih*, M. S. Lin, Y. C. Hu, P. Z. Chang 一般論文
2011 Mechanical Model of Liquid Crystal Cell Associated with Gravity Mura The 18th International Display Workshops Ling-Yi Ding Ling-Yi Ding, Jen-Chieh Li, Wen-Pin Shih, Mao-Shin Lin, Yuh-Chung Hu, Pei-Zen Chang 一般論文
2011 On the dynamics of the micro-ring driven by traveling bias voltages 2011 International Conference on Advanced Design and Manufacturing Engineering Xiuqian Ye Xiuqian Ye, Yibao Chen, Bih-Sheng Hsu, Yuh-Chung Hu 一般論文
2010 A numerical study of the heat transfer phenomena on ZnO pyroelectric film sensor International MultiConference of Engineers and Computer Scientists M Suen M Suen, DTW Lin, YC Hu, JC Hsieh 一般論文
2010 An analytical model for optimizing LCD-cell design The 12th International Congress on Mesomechanics WC Chuang WC Chuang, CW Lin, YC Hu, WP Shih, PZ Chang 一般論文
2010 Optimal residual stress in CMOS fabrication The 34th National Conference on Theoretical and Applied Mechanics Wan-Chun Chuang Hsin-Li Lee, David T. W. Lin, Yuh-Chung Hu, Pei-Zen Chang, Ngo Bao Ouyen
2009 CMOS-compatible electrochemical process for RF CMOS inductors Solid-State Sensors, Actuators and Microsystems Conference, 2009. TRANSDUCERS 2009. International LY Ding LY Ding, T Wang, YC Hu, WP Shih, SS Lu, PZ Chang 一般論文
2009 Fabrication and vibration analysis of micro-cross beams 4th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2009. NEMS 2009. WH Gau, WH Gau, SC Huang, YC Hu 一般論文
2009 Integration of micro temperature sensor and metal foil as gas diffusion layer for micro fuel cell 4th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2009. NEMS 2009. CY Lee CY Lee, SJ Lee, YC Hu, CH Lin, YM Lee, WY Fan 一般論文
2009 Study on the acoustic impedance matching of human tissue for power transmitting/charging system of implanted biochip 2009 IEEE International Conference on Nano/Molecular Medicine and Engineering (NANOMED), YC Hu YC Hu, PL Liao, WP Shih, XY Wang, PZ Chang 一般論文
2008 An electrical testing method of the structural material of micro devices 3rd IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2008. NEMS 2008. YC Hu YC Hu, JH Lin, KY Huang, WC Chuang 一般論文
2008 An improved molecular dynamics algorithm for the larger momentum molecular system The 3rd IEEE International Conference on Nano/Micro Engineered and Molecular system (NEMS 2008) David T.W. Lin David T.W. Lin, Ching-Yu Yang, Ruei-Yong Wang, Yuh-Chung Hu 一般論文
2007 Extracting the Young's Modulus and Stress Gradient of Thin Films from the Pull-in Voltage of a Micro Curled Cantilever Beam 2nd IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2007. NEMS'07. YC Hu YC Hu, CS Wei, CC Hsiao, DTW Lin 一般論文
2007 The effects of mechanical thin-film properties on the pyroelectric signals 2nd IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2007. NEMS'07. CS Wei CS Wei, CC Hsiao, YC Hu 一般論文
2006 A Molecular Dynamics Study of Thermal Ablation 1st IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2006. NEMS'06. DTW Lin DTW Lin, YC Hu 一般論文
2006 A closed form solution for the pull-in voltage of the micro bridge with initial stress subjected to electrostatic loads 1st IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2006. NEMS'06. YC Hu YC Hu, DTW Lin, GD Lee 一般論文
2005 A Valve-less Micropump Driven by Continuous Electrowetting (CEW) Actuation 16 th International Symposium on Transport Phenomena (ISTP-16) YC Hu YC Hu, XJ Chen 一般論文
2005 High Precision Young’s Modulus Extraction of Thin Films Through Measuring the Electric-Circuit Behavior of Microstructures ASME 2005 Pacific Rim Technical Conference and Exhibition on Integration and Packaging of MEMS, NEMS, and Electronic Systems collocated with the ASME 2005 Heat Transfer Summer Conference YC Hu YC Hu, WH Gau, WH Tu 一般論文
2005 The Study of the Design in Micro Modal Actuators Using the Holographic Interferometry ASME 2005 Pacific Rim Technical Conference and Exhibition on Integration and Packaging of MEMS, NEMS, and Electronic Systems collocated with the ASME 2005 Heat Transfer Summer Conference. American Society of Mechanical Engineers WH Gau WH Gau, YC Hu, YY Peng 一般論文
2004 On the dynamic and stability analysis of electrostatically actuated microstructures The 1st International Symposium on Micro & Nano Technology (ISMNT-1) YC Hu YC Hu, YH Wang, SC Huang 一般論文
專書
年度 專書名稱 出版單位 第一作者 共同作者 國際書號 總頁數 語言 相關網址
2016 機械製造 全華圖書股份有限公司 孟繼洛 孟繼洛;傅兆章;許源泉;黃聖芳;李炳寅;翁豐在;黃錦鐘;林守儀;林瑞璋;林維新;馮展華;胡毓忠;楊錫杭 9789864632473 中文
2002 奈米科學與技術導論 經濟部工業局 李世光 張所鋐、林世明、張培仁、林啟萬、黃榮山、胡毓忠、劉安順、孫美芳、韓謝忱、陳吉良、劉盈村、王裕銘 中文


專書論文
年度 論文篇名 專書名稱 出版單位 第一作者 共同作者 國際書號 起始頁 結束頁 語言 相關網址
2017 Wiring the Tin–Silver–Copper Alloy by Fused Deposition Modeling Innovative Design and Development Practices in Aerospace and Automotive Engineering Springer Singapore YC Hu YC Hu, YT Wang, HH Wu
西元年度 計畫名稱 主持人 工作職稱 共同(協同)主持人 委託/補助機構 計畫開始日 計畫結束日 語言 相關網址
2024 產學合作計畫-為淨零碳排之熱擴散式流量感測器研究 胡毓忠 主持人 張培仁 桓達科技股份有限公司 2024/06/01 2025/05/31
2024 用於低碳製造之精準加工導航系統-子計畫二:工具機精度優化及整機熱誤差補償模組 胡毓忠 主持人 國科會 2024/08/01 2025/07/31
2023 用於低碳製造之精準加工導航系統─子計畫二:工具機自適應精度優化及誤差補償模組 胡毓忠 主持人 國家科學及技術委員會 2023/08/01 2024/10/31
2022 產學合作計畫-工業物聯網之壓電諧振式物位感測器研究 胡毓忠 主持人 國科會、桓達科技股份有限公司 2022/11/01 2023/10/31
2022 用於低碳製造之精準加工導航系統-子計畫三:用於工具機之熱誤差補償的數位分身和無線切削溫度感測刀把 胡毓忠 主持人 科技部 2022/08/01 2023/10/31
2021 具切削力感測功能之智慧車刀 胡毓忠、學生曾亮維 主持人 科技部 2021/07/01 2022/02/28
2021 工具機之加工誤差補償的完整解決方案-子計畫二:工具機之熱誤差AI模型和即時補償 胡毓忠 主持人 科技部 2021/08/01 2022/10/31
2021 產學合作計畫-新型數位式熱分散流量開關 胡毓忠 主持人 張培仁 科技部、桓達科技股份有限公司 2021/06/01 2022/05/31
2020 工具機之即時誤差補償的完整解決方案-子計畫二:工具機之即時熱誤差補償 胡毓忠 主持人 科技部 2020/08/01 2021/07/31
2020 產學合作計畫-工業廢熱回收技術-智能化增強熱交換系統 胡毓忠 主持人 任春平、謝瑞青、杜翌群 科技部、桓達科技股份有限公司、鼎堅綠能科技股份有限公司 2019/09/01 2020/12/31
2020 產學合作計畫-科氏質量流量計的機構與信號處理改善 胡毓忠 主持人 張培仁 科技部、桓達科技股份有限公司 2020/06/01 2021/05/31
2019 U型管科氏質量流量計(2/2) 胡毓忠 主持人 張培仁 科技部、桓達科技股份有限公司 2019/06/01 2020/05/31
2019 工具機之即時誤差補償的完整解決方案-子計畫二:工具機之即時熱誤差補償 胡毓忠 主持人 科技部 2019/08/01 2020/07/31
2018 導入SkyMars雲端計算系統之智慧工具機主軸-子計畫二:導入SkyMars的智慧主軸之軸承溫度感測器(III) 胡毓忠 主持人 科技部 2018/08/01 2019/07/31
2018 工具機主軸的無線溫度感測模組 胡毓忠、學生向芷萱 指導教授 科技部 2018/07/01 2019/02/28
2018 產學合作計畫-U型管科氏質量流量計(1/2) 胡毓忠 主持人 張培仁 科技部、桓達科技股份有限公司 2018/06/01 2019/05/31
2017 106年度國家實驗研究院[物聯網感測器服務平台專案] - 工具機智慧主軸之熱特徵辨識系統 胡毓忠 主持人 財團法人國家實驗研究院 2017/06/01 2018/05/31
2017 導入SkyMars雲端運算系統之智慧工具機主軸-子計畫二:導入SkyMars 的智慧主軸之軸承溫度感測器(II) 胡毓忠 主持人 科技部 2017/08/01 2018/07/31
2017 產學合作計畫—單直管科氏質量流量計 胡毓忠 主持人 張培仁 科技部 桓達科技股份有限公司 2017/02/01 2018/01/31
2016 導入SkyMars雲端運算系統之智慧型工具機主軸-子計畫二:導入SkyMar s的智慧主軸之軸承溫度感測器 胡毓忠 主持人 李其源 科技部 2016/08/01 2017/07/31
2016 攜帶型去毒除菌淨水石量產效能提升計畫 胡毓忠 主持人 博凡生技有限公司 2016/06/01 2016/10/30
2016 產學合作計畫-新型音叉式物位計 胡毓忠 主持人 張培仁 科技部 桓達科技股份有限公司 2016/02/01 2017/01/31
2016 產學合作計畫—多重振膜式微機電麥克風(2/2) 胡毓忠 主持人 張培仁 科技部 美律實業股份有限公司 2016/02/01 2017/01/31
2016 點亮台灣為水卸妝-CoCl2/FePc/KOH活化CNT/C極板於生物-電-芬頓燃料電池 性能提升 胡毓忠 張劭宇 指導教授 科技部 2016/07/01 2017/02/28
2015 產學合作計畫-多重振膜式微機電麥克風(1/2) 胡毓忠 主持人 張培仁 科技部 美律實業股份有限公司 2015/02/01 2016/01/31
2014 奈米加工技術應用於有機藥食材製程提升計畫 王宜達 協同主持人 胡毓忠 中如慈心國際貿易有限公司 2014/11/01 2015/10/31
2014 新型微介電彈性體致動器 胡毓忠 主持人 張培仁 科技部 2014/08/01 2016/07/31
2011 以噴墨印刷製作可撓性焦電感測器陣列(2/2) 胡毓忠 主持人 行政院國家科學委員會 2011/08/01 2012/10/31
2011 承受移動靜電力之微結構的動態特性與穩定性分析及其應用研究 胡毓忠 主持人 行政院國家科學委員會 2011/08/01 2014/10/31
2010 以噴墨印刷製作可橈性焦電感測器陣列(1/2) 胡毓忠 主持人 行政院國家科學委員會 2010/08/01 2011/07/31
2010 能源國家型人才培育自由導向整合型計畫-綠色家園-宜蘭地區節能減碳教育研究與發展計畫(2/2) 張章堂 共同主持人 游光昭、王金燦、蔡國忠、胡毓忠、陳博彥、邱求三 行政院國家科學委員會 2010/06/01 2011/03/31
2009 承受移動靜電力之微結構的電彈性分析及其於微機械式單震盪器帶通濾波器之應用研究 胡毓忠 主持人 行政院國家科學委員會 2009/08/01 2010/10/31
2009 橋狀結構模型建立技術 胡毓忠 主持人 財團法人工業技術研究院 2009/08/01 2010/07/31
2008 可橈性氧化鋅焦電感測器研發 胡毓忠 主持人 行政院國家科學委員會 2008/08/01 2009/10/31
專利類別 發表日期 專利名稱 專利證號 專利國別 發明人 專利權人 專利開始日期 專利結束日期 相關網址 說明
新型 2017/09/21 立體式震膜微機電麥克風(立體式振膜微機電麥克風) M554670 中華民國 胡毓忠 國立宜蘭大學 2018/01/21 2027/09/20
新型 2017/09/07 平板型音叉物位開關 M553526 中華民國 胡毓忠 國立宜蘭大學 2017/12/21 2027/09/06
發明 2009/12/10 可撓性熱電能源轉換器及其製程方法 I481087 中華民國 胡毓忠、余立人、黃國益 國立宜蘭大學 2015/04/11 2030/01/19