Orbit

胡 毓忠 Yuh-Chung Hu
專任
職稱 教授
姓名 胡 毓忠 Yuh-Chung Hu
聯絡電話 03-9317469
電子郵件 ychu@niu.edu.tw
研究專長 微機電系統
工業感測器
智慧機械
智慧製造
振動學與聲學
授課領域 微機電系統
工業感測器
智慧機械
智慧製造
振動學與聲學
學歷 國立臺灣科技大學 機械工程 博士
年度 論文名稱
2013 Wei-Hsiang Tu, Pei-Zen Chang, Chih-Kung Lee, Yuh-Chung Hu, "On the Dynamics of a Micro-beam Driven by a Traveling Harmonic Force ," Advanced Materials Research
2013 W. C. Chuang, David T. W. Lin, Y.C. Hu, H.L. Lee, C.H. Cheng, P.Z. Chang, N. B. Quyen, "A Method Integrating Optimal Algorithm and FEM on CMOS Residual Stress ," Journal of Mechanics
2013 胡毓忠, 廖偉珈, "以噴墨印刷製作可撓性焦電感測器 ," 微系統暨奈米科技協會會刊,第29期
2013 Chao-Kuang Chen, David T.W. Lin, Yung-der Juang, Yuh-Chung Hu, Yen Ting Kuo, Chu Yu Chen, "The Innovated Flexible Surface Acoustic Wave Devices on Fully InkJet Printing Technology," Smart Science
2013 Yuh-Chung Hu, David T.W. Lin, Hai-Lin Lee, Pei-Zen Chang, "A Solution Processed ZnO Thin Film," Applied Mechanics and Materials
2013 Tsung Chi Hsieh, Kuan-Ju Chen, David T. W. Lin, Yang Der Juang, Yuh Chung Hu, "The Improvement of Parameters of Manufacturing Process on Flexible Surface Acoustic Wave Device ," Applied Mechanics and Materials
2012 Wan-Chun Chuang, Yuh-Chung Hu, Pei-Zen Chang, "CMOS-MEMS Test-Key for Extracting Wafer-Level Mechanical Properties," Sensors
2012 Wei-Hsiang Tu, Wan-Chun Chuang, Wen-Chang Chu, Chih-Kung Lee, Pei-Zen Chang, Yuh-Chung Hu, "Etching holes effects on CMOS-MEMS capacitive structure," Journal of Intelligent Material Systems and Structures
2012 Ling-Yi Ding, Jen-Chieh Li, Wen-Pin Shih, Mao-Shin Lin, Yuh-Chung Hu, Pei-Zen Chang, "An Analytical Model for Instant Design of LCD Cell with Photospacer under Gravity and Local Loading ," Journal of the Society for Information Display
2012 David T.W. Lin*, Yu Chung Hu, Chin-Hsiang Cheng,, “The Optimization of the Thermal Response on the ZnO Flexible Pyroelectric Film Temperature Sensor,” IEEE Sensors
2012 Wan-Chun Chuang, Chang-WenWang, Wen-Chang Chu, Pei-Zen Chang, Yuh-Chung Hu, "The fringe capacitance formula of microstructures," The Micromechanics and Microengineering
2012 Xiuqian Ye, Yibao Chen, Da-Chih Chen, Kuo-Yi Huang, Yuh-Chung Hu, "The Electromechanical Behavior of a Micro-ring Driven by Traveling Electrostatic Force," Sensors
2011 David T.W. Lin, Hung-Yi Li, Yuh-Chung Hu*, “Study on the heat transfer of the plate-fin heat sink under impinging jet cooling,” Progress in Computational Fluid Dynamics, 11(3/4), 237-245 (2011).
2011 Xiuqian Ye, Yibao Chen, Bih-Sheng Hsu, Yuh-Chung Hu*,, “On the Dynamics of the Micro-ring Driven by Traveling Bias Voltages,” Advanced Materials Research, 311-313, 1027-1031 (2011). (EI)
2010 Jing-Long Han, Chin-Tsan Wang, Yuh-Chung Hu, Ying Liu, Wen-Ming Chen, Chang-Tang Chang, Hui-Zhong Xu, Bor-Yann Chen, “Exporing Power Generation of Single-Chamber Microbial Fuel Cell Using Mixed and Pure Cultures,” Journal of the Taiwan Institute of Chemical Engineers, 41(5), 606-611 (2010). (SCI)
2010 Wan-Chun Chuang, Hsin-Li Lee, Pei-Zen Chang, Yuh-Chung Hu*, “Review on the Modeling of Electrostatic MEMS,” Sensors, 10 (2010) 6149-6171. (SCI impact factor 1.98)
2010 Ling-Yi Ding, Wen-Pin Shih*, Yuh-Chung Hu, Yi-Jie Chen, Pei-Zen Chang, “CMOS Compatible Electrochemical Process for Improving Quality Factor of Spiral Microinductors,” Micro & Nano Letters, 5(5) (2010) 266-269. (SCI)
2010 Chun-Ching Hsiao, Yuh-Chung Hu, and Rwei-Ching Chang, “Some Design Considerations on the Electrode Layout of ZnO Pyroelectric Sensors,” Sensors and Materials , 22(8), 417-425, 2010. (SCI impact factor 0.398)
2010 Chin-Tsan Wang, Kuo-Yi Huang, David T.W. Lin, Wei-Chia Liao, Hua-Wei Lin, Yuh-Chung Hu*, "A Flexible Proximity Sensor Fully Fabricated by Inkjet Printing,” Sensors, 10(5), 5054-5062. (SCI impact factor 1.98)
2010 Chin-Tsan Wang *, Yuh-Chung Hu, Pei-Lun Zheng, “Novel Biometric Flow Slab Design for Improvement of PEMFC Performance,” Applied Energy, vol. 87, 1366-1375 (SCI impact factor 1.465)
2009 Chin-Tsan Wang; Yuh-Chung Hu; Tzu-Yang Hu, “Biophysical Micromixer,” Sensors, 9, 5379-5389. (SCI impact factor 1.905)
2009 Bor-Yann Chen; Chia-Yi Yen; Wen-Ming Chen; Chan-Tang Chang; Chin-Tsan Wang ;, “Exploring Threshold Operation Criteria of Biostimulation for Azo Dye Decolorization Using Immobilized Cell Systems,” Bioresource Technology, 100, 5763-5770. (SCI impact factor 4.815)
2009 Wan-Chun Chuang; Yuh-Chung Hu; Chi-Yuan Lee; Wen-Pin Shih; Pei-Zen Chang, “Electromechanical Behavior of the Curled Cantilever Beam,” Journal of Micro/Nano Lithography, MEMS, and MOEMS, 8(3), 033020. (SCI impact factor 0.986)
2009 Chi-Yuan Lee; Shuo-Jen Lee; Yuh-Chung Hu; Wen-Pin Shih; Wei-Yuan Fan; Chih-Wei Chuang, “Integration of Silicon Micro-Hole Arrays as a Gas Diffusion Layer in a Micro Fuel Cell,” International Journal of Hydrogen Energy, 34, 6457-6464. (SCI impact factor 4.028)
2009 C.C. Hsiao; Y.C. Hu; R.C. Chang; C.K. Chao, “Residual stresses and mechanical properties of a ZnO pyroelectric sensor,” Theoretical and Applied Fracture Mechanics, 52, 1–6. (SCI impact factor 1.391)
2009 Chi-Yuan Lee; Shuo-Jen Lee; Yuh-Chung Hu; Wen-Pin Shih; Wei-Yuan Fan; Chih-Wei Chuang, “Real Time Monitoring of Temperature of a Micro Proton Exchange Membrane Fuel Cell,” Sensors, 9, 1423-1432. (SCI impact factor 1.905)
2008 Xuan-Yu Wang, Chi-Yuan Lee*, Yuh-Chung Hu, Wen-Pin Shih, Chih-Cheng Lee, Jung-Tang Huang, and Pei-Zen Chang, “The Fabrication of silicon-based PZT microstructures using aerosol deposition method,” Journal of Micromechanics and Microengineering, 18(5), 055034 (2008). (SCI IF=2.321)
2008 Chun-Ching Hsiao, Kuo-Yi Huang, and Yuh-Chung Hu*, “Fabrication of a ZnO Pyroelectric Sensor,” Sensors, 8(1), 185-192 (2008). (SCI IF=1.373)
2007 Yuh-Chung Hu* and Po-Yuan Huang, “Wafer-level microelectromechanical system structural material test by electrical signal before pull-in,” Applied Physics Letters, 90(12), 121908 (2007). (SCI IF=4.127)
2007 Yuh-Chung Hu*, Wen-Pin Shih, and Guan-De Lee, “A method for mechanical characterization of capacitive devices at wafer-level via detecting the pull-in voltages of two test-bridges with different lengths,” Journal of Micromechanics and Microengineering, 17(6), 1099-1106 (2007). (SCI IF=2.499)
2007 Yuh-Chung Hu* and Chung-Sheng Wei, “ An analytical model considering the fringing fields for calculating the pull-in voltage of micro curled cantilever beams,” Journal of Micromechanics and Microengineering, 17(1), pp.61-67 (2007). (SCI IF=2.499)
2007 Shenq-Yih Luo*, Tsung-Han Yu, and Yuh-Chung Hu, “Fabrication of the micro nickel/diamond abrasive pellet array lapping tools using the LIGA-like technology,” Journal of Micromechanics and Microengineering, 17(6), 1130-1138 (2007). (SCI IF=2.499)
2007 Yuh-Chung Hu*, Pei-Zen Chang, and Wan-Chun Chuang, “An approximate analytical solution to pull-in voltage of micro bridge with elastic boundary,” Journal of Micromechanics and Microengineering, 17(9), 1870-1876 (2007). (SCI IF=2.499)
2007 Yuh-Chung Hu* and Guan-De Lee, “A Closed Form Solution for the Pull-in Voltage of the Micro Bridge,” Tamkang Journal of Science and Engineering, 10(2), 147–150 (2007). (EI)
2006 Yuh-Chung Hu*, “Closed form solutions for the pull-in voltage of the micro curled beams subjected to electrostatic loads,” Journal of Micromechanics and Microengineering, 16, pp. 648-655 (2006). (SCI IF=2.499)
2006 C. S. Wei, Y. Y. Lin, Y. C. Hu*, C. W. Wu, C. K. Shih, C. T. Hwang, S. H. Chang, “Partial electroded ZnO pyroelectric sensors for responsivity improvement,” Sensors and Actuators A: Physical, 128(1), pp.18-24 (2006). (SCI IF=1.363)
2006 Kun-Nan Chen, Wei-Hsin Gau, and Yuh-Chung Hu*, “Identification of Material and Geometrical Parameters for Microstructures by Dynamic Finite Element Model Updating,” Microsystem Technologies, 12, pp. 736-745 (2006). (SCI IF=0.72)
2006 Yuh-Chung Hu*, Wei-Hsin Gau, and Wei-Hsiang Tu, “Mechanical Characterization of Thin Films by the Capacitance-Voltage Measurement of Microstructures,” Materials Science Forum, 505-507, pp.145-150 (2006). (SCI IF=0.399)
2005 Yuh-Chung Hu* and Wei-Hsiang Tu, “Non-linear and linearized algorithms for the Young’s modulus extraction of Thin Films through the C-V measurement of Microstructures,” Journal of Applied Physics, Vol.98, 104504 (2005). (SCI IF=2.498)
2004 Y. C. Hu*, C. M. Chang, and S. C. Huang, “Some Design Considerations on the Electrostatically Actuated Microstructures,” Sensors and Actuators A: Physical, Vol.112, No.1, pp.155-161 (2004). (SCI IF=1.363)
2004 李世光,胡毓忠, “微機電系統與奈米科技,”科學發展月刊,378期,pp. 56-61 (2004)
2003 胡毓忠*,李世光,孫美芳, “我國從MEMS到NEMS的發展策略,”科技發展政策報導,SR9201,pp. 1-10 (2003)
2000 Yuh-Chung Hu* and Shih-Chin Huang, "The frequency response and damping e€ect of three-layer," Computers and Structurs ,76, pp. 577-591( 2000).(SCI)
2000 Yuh-Chung Hu* and Shih-Chin Huang, "An Application of Constrained Layer Damping on the Cylindrical Shells Coveying Fluid," Journal of the Chinese Society of Mechanical Engineers," 21(2), pp. 189-200 (2000). (SCI)
1999 Yuh-Chung Hu* and Shih-Chin Huang, "Forced Response of Sandwich Ring with Viscoelastic Core Subjected to Traveling Loads," Journal of Acoustical Society of America, 106(1), pp. 202-210 (1999). (SCI)
年度 論文名稱
2010 Wan-Chun Chuang, Hsin-Li Lee, David T. W. Lin, Yuh-Chung Hu, Pei-Zen Chang, Ngo Bao Ouyen, “Optimal residual stress in CMOS fabrication,” The 34th National Conference on Theoretical and Applied Mechanics, Yunlin, Taiwan, Nov. 19-20. (2010),
2009 Po-Lin. Liao, Yuh-Chung Hu, Wen-Pin Shih, Xuan-Yu Wang, and Pei-Zen Chang, “Study on the Acoustic Impedance Matching of Human Tissue for Power Transmitting/Charging System of Implanted Biochip,” IEEE NANOMED 2009, PID 89, Oct. 18-21, 2009, Tainan, Taiwan. (EI),
2009 蕭俊卿, 吳奕諼, 趙振綱, 張瑞慶, 胡毓忠, “碲化鉍合金熱電薄膜發電器之設計與製造,” 第十三屆奈米工程暨微系統技術研討會, PID 06-1227, Jul. 9-10, 2009,國立交通大學,新竹,臺灣,
2009 蕭俊卿, 楊雅芬, 趙振綱, 胡毓忠, 張瑞慶, 張培仁, “以二氧化碳雷射改善PZT薄膜於澆電感測器之應用,” 第十三屆奈米工程暨微系統技術研討會, PID 07-1266, Jul. 9-10, 2009,國立交通大學,新竹,臺灣,
2009 L. Y. Ding, T. Wang, Y. C. Hu, W. P. Shih, S. S. Lu, and P. Z. Chang, “CMOS-Compatible Electromechanical Process for RF CMOS Inductors,” IEEE Transducers 2009, 2118-2121, June 21-25, 2009, Denver, CO. USA. (EI),
2009 Chin-Tsan Wang, Tzong-Shyng Leu, Jui-Ming Yum and Yuh-Chung Hu, “Thermal Analysis of Micro Capillary Pumped Loop System,” Proceedings of the Seventh International ASME Conference on Nanochannels, Microchannels and Minichannels (ICNMM 2009), 82197, June 22-24, 2009, Pohang, South Korea,
2009 Chi-Yuan Lee and Yuh-Chung Hu, “Integration of Micro Temperature Sensor and Metal Foil as Gas Diffusion Layer for Micro Fuel Cell,” The Fourth Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems (IEEE NEMS 2009), 164-167, Jan. 5-8, Shenzhen, China. (EI),
2009 Wei-Hsin Gau and Yuh-Chung Hu, “Fabrication and Vibration Analysis of Micro-Cross Beams,” The Fourth Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems (IEEE NEMS 2009), 207-210, Jan. 5-8, Shenzhen, China. (EI),
2008 Yuh-Chung Hu*, Chun-Ching Hsiao, Chien-Ming Lee, and Pao-Cheng Lin, "Flexible PZT Pyroelectric Sensors," Asia-Pacific Conference on Transducers and Micro-Nano Technology 2008 (APCOT 2008), ID0474,
2008 Yuh-Chung Hu*, Jia-Hong Lin, Kuo-Yi Huang, and Wan-Chun Chuang,, “An Electrical Testing Method of the Structural Material of Micro Devices,” The Third Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems (IEEE NEMS 2008), pp. 69-73, Jan. 6-9, Sanya, China.,
2008 David T. W. Lin, Ching-Yu Yang, Ruei-Yong Wang, ,Yuh-Chung Hu*, “An Improved Molecular Dynamics Algorithm for the Larger Momentum Molecular System,” The Third Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems (IEEE NEMS 2008), pp. 397-401, Jan. 6-9, Sanya, China.,
2007 Yuh-Chung Hu*, Chung-Sheng Wei, Chun-Ching Hsiao, and David T. W. Lin,, “Extracting the Young’s Modulus and Stress Gradient of Thin Films from the Pull-in Voltage of a Micro Curled Cantilever Beam,” The Second Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems (IEEE NEMS 2007), Paper No. 092,,
2007 Chung-Sheng Wei, Chun-Ching Hsiao, and Yuh-Chung Hu*,, “The Effects of Mechanical Thin-film Properties on the Pyroelectric Signals,” The Second Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems (IEEE NEMS 2007), Paper No. 107, Jan. 16-19, Bangkok, Thailand. (EI),
2006 胡毓忠*, 黃柏元,, “以測試件之電容-電壓變化反算薄膜材料之楊氏模數,” 中國機械工程學會第二十三屆全國學術研討會論文集, 中華民國九十五年十一月二十四日、二十五日,論文編號: E1-032, 崑山科技大學, 臺灣,台南.,
2006 Yuh-Chung Hu* and Guan-De Lee,, “A Closed Form Solution for the Pull-in Voltage of the Micro Bridge,” 第十屆奈米工程暨微系統技術研討會, 中華民國九十五年十一月三十日、十二月一日,論文編號: 0090,財團法人工業技術研究院,臺灣,新竹.,
2006 Yuh-Chung Hu*,, “On the Dynamic and Stability Analysis of the Microdiaphragm for Electrostatic Micropumps,” 17th International Symposium on Transport Phenomena (ISTP-17), Paper No. 3-C-I-3, Sep. 4 – 8, Toyama, Japan.,
2006 Yuh-Chung Hu*, David T. W. Lin, and Guan-De Lee,, “A Closed Form Solution for the Pull-in Voltage of the Micro Bridge with Initial Stress subjected to Electrostatic Loads,” The First Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems (IEEE NEMS 2006), pp.759-763, Jan. 18-,
2006 David T. W. Lin and Yuh-Chung Hu*, “A Molecular Dynamics Study of Thermal Ablation,” The First Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems (IEEE NEMS 2006), pp. 596-600, Jan. 18-21, Zhuhai, China. (EI),
2005 Yuh-Chung Hu*, Wei-Hsin Gau, and Wei-Hsiang Tu,, “High Precision Young’s Modulus Extraction of Thin Films through Measuring the Electric-Circuit Behavior of Microstructures,” The ASME/Pacific Rim Technical Conference and Exhibition on Integration and Packaging of MEMS, NEMS, and Electronic Systems, Pape,
2005 Wei-Hsin Gau, Yuh-Chung Hu, and Wei-Hsiang Tu,, “The Study of the Design in Micro Modal Actuators Using the Holographic Interferometry,” The ASME/Pacific Rim Technical Conference and Exhibition on Integration and Packaging of MEMS, NEMS, and Electronic Systems, Paper No. IPACK2005-73333, July 17-22, 20,
2005 Yuh-Chung Hu* and Xiang-Jun Chen,, “A Valve-less Micropump Driven by Continuous Electrowetting (CEW) Actuation,” 16th International Symposium on Transport Phenomena (ISTP-16), Paper ID 062, Aug. 29 – Sep. 01, Prague, Czech Republic.,
2005 Yuh-Chung Hu*, Wei-Hsin Gau, and Wei-Hsiang Tu,, “Mechanical Characterization of Thin Films by the Capacitance-Voltage Measurement of Microstructures,” 2005 International Conference on Advanced Manufacture (ICAM2005), Paper No. A061, Nov. 28 - Dec.02, Taipei, Taiwan.,
2005 高維新, 胡毓忠*, 賴彥豪, 郭智宏,, “吸入式光碟機電腦動態模擬分析,” 中國機械工程學會第二十二屆全國學術研討會論文集, 中華民國九十四年十一月二十五日、二十六日論文編號: C9-034, 國立中央大學臺灣、中壢.,
2004 Yuh-Chung Hu*, Yung-Hsiang Wang, and Shyh-Chin Huang,, “On the Dynamic and Stability Analysis of Electrostatically Actuated Microstructures,” The 1st International Symposium on Micro & Nano Technology, Paper No. III-2-01, 14-17 March, Honolulu, Hawaii, USA.,
年度 計畫名稱 參與人 職稱/擔任之工作 計畫期間 補助/委託或合作機構
2017 導入SkyMars雲端運算系統之智慧工具機主軸-子計畫二:導入SkyMars 的智慧主軸之軸承溫度感測器(II)(MOST 106-2221-E-197-014 -) 主持人 2017.08.14 ~ 2018.07.14 科技部
2017 工具機智慧主軸之熱特徵辨識系統(NARL-IOT-106-017) 主持人 2017.06.14 ~ 2018.05.14 財團法人國家實驗研究院
2016 導入SkyMars雲端運算系統之智慧型工具機主軸-子計畫二:導入SkyMars的智慧主軸之軸承溫度感測器(I) (MOST105-2221-E-197-012-) 主持人 2016.08.14 ~ 2017.07.14 科技部
2016 科技部開發型產學合作計畫−新型音叉式物位計 (MOST105-2622-E-197-001-CC2)(106年度科技部產學合作計畫成果特優獎) 主持人 2016.02.14 ~ 2017.01.14 科技部、桓達科技股份有限公司
2016 科技部開發型產學合作計畫−多重振膜式微機電麥克風(2/2) (MOST 105-2622-E-197-003-CC2) 主持人 2016.02.14 ~ 2017.01.14 科技部、美律實業股份有限公司
2015 科技部開發型產學合作計畫−多重振膜式微機電麥克風(1/2) (MOST104-2622-E-197-001-CC2) 主持人 2015.02.14 ~ 2016.01.14 科技部、美律實業股份有限公司
2014 新型微介電彈性體致動器 (MOST103-2221-E-197-015-MY2) 主持人 2014.08.14 ~ 2016.07.14 科技部
2011 以噴墨印刷製作可撓性焦電感測器陣列(2/2)(MOST100-2628-E-197-004) 胡毓忠 Yuh-Chung Hu 主持人 2011.08.14 ~ 2011.07.14 國科會
2011 (優秀年輕學者研究計畫)承受移動靜電力之微結構的動態特性與穩定性分析及其應用研究(MOST100-2628-E-197-001-MY3)(101年度國科會自動化學門成果發表會佳作獎) 胡毓忠 Yuh-Chung Hu 主持人 2011.08.14 ~ 2014.07.14 國科會
2010 以噴墨印刷製作可撓性焦電感測器陣列(1/2)(MOST99-2628-E-197-003) 胡毓忠 主持人 2010.08.14 ~ 2011.07.14 國科會
2009 承受移動靜電力之微結構的電彈性分析及其於微機械式單震盪器帶通濾波(MOST98-2221-E-197-017) 胡毓忠 主持人 2009.08.14 ~ 2010.07.14 國科會
2009 橋狀結構模型建立技術 胡毓忠 主持人 2009.08.14 ~ 2010.07.14 財團法人工業技術研究院
2008 可撓性氧化鋅焦電感測器研發(NSC 97-2221-E-211-006-) 胡毓忠 主持人 2008.08.14 ~ 2009.07.14 行政院國家科學委員會
2006 以微測試結構之電路行為萃取薄膜材料之楊氏模數,剪切模數,及殘留應力的技術研發(95-2221-E-211-008-MY2) 胡毓忠 主持人 2006.08.14 ~ 2008.07.14 行政院國家科學委員會
2005 全電信號之微機電薄膜機械性質檢測技術與標準測試元件之研發(NSC 94-2212-E-211-006-) 胡毓忠 主持人 2005.08.14 ~ 2006.07.14 行政院國家科學委員會
2004 應用連續電濕潤驅動方式之低電壓低耗能之無閥式微泵浦(NSC 93-2212-E-211-010- ) 胡毓忠 主持人 2004.08.14 ~ 2005.07.14 行政院國家科學委員會
2003 靜電驅動式微結構之動態與穩定性分析(NSC 92-2218-E-211-003- ) 胡毓忠 主持人 2003.08.14 ~ 2004.07.14 行政院國家科學委員會
學校名稱 系所 學位
國立臺灣科技大學 機械工程系 博士