Orbit

胡 毓忠 Yuh-Chung Hu
專任
職稱 教授
姓名 胡 毓忠 Yuh-Chung Hu
聯絡電話 03-9317469
電子郵件 ychu@niu.edu.tw
研究專長 軟性感測器技術 微奈米機電系統 生產自動化技術 固體力學
授課領域 微積分 物理 應用力學 軟性電子 半導體製程
學歷 國立臺灣科技大學 機械工程 博士
論文名稱 全部作者 年度
"On the Dynamics of a Micro-beam Driven by a Traveling Harmonic Force ," Advanced Materials Research Wei-Hsiang Tu, Pei-Zen Chang, Chih-Kung Lee, Yuh-Chung Hu 2013
"A Method Integrating Optimal Algorithm and FEM on CMOS Residual Stress ," Journal of Mechanics W. C. Chuang, David T. W. Lin, Y.C. Hu, H.L. Lee, C.H. Cheng, P.Z. Chang, N. B. Quyen 2013
"以噴墨印刷製作可撓性焦電感測器 ," 微系統暨奈米科技協會會刊,第29期 胡毓忠, 廖偉珈 2013
"The Innovated Flexible Surface Acoustic Wave Devices on Fully InkJet Printing Technology," Smart Science Chao-Kuang Chen, David T.W. Lin, Yung-der Juang, Yuh-Chung Hu, Yen Ting Kuo, Chu Yu Chen 2013
"A Solution Processed ZnO Thin Film," Applied Mechanics and Materials Yuh-Chung Hu, David T.W. Lin, Hai-Lin Lee, Pei-Zen Chang 2013
"The Improvement of Parameters of Manufacturing Process on Flexible Surface Acoustic Wave Device ," Applied Mechanics and Materials Tsung Chi Hsieh, Kuan-Ju Chen, David T. W. Lin, Yang Der Juang, Yuh Chung Hu 2013
"CMOS-MEMS Test-Key for Extracting Wafer-Level Mechanical Properties," Sensors Wan-Chun Chuang, Yuh-Chung Hu, Pei-Zen Chang 2012
"Etching holes effects on CMOS-MEMS capacitive structure," Journal of Intelligent Material Systems and Structures Wei-Hsiang Tu, Wan-Chun Chuang, Wen-Chang Chu, Chih-Kung Lee, Pei-Zen Chang, Yuh-Chung Hu 2012
"An Analytical Model for Instant Design of LCD Cell with Photospacer under Gravity and Local Loading ," Journal of the Society for Information Display Ling-Yi Ding, Jen-Chieh Li, Wen-Pin Shih, Mao-Shin Lin, Yuh-Chung Hu, Pei-Zen Chang 2012
“The Optimization of the Thermal Response on the ZnO Flexible Pyroelectric Film Temperature Sensor,” IEEE Sensors David T.W. Lin*, Yu Chung Hu, Chin-Hsiang Cheng, 2012
"The fringe capacitance formula of microstructures," The Micromechanics and Microengineering Wan-Chun Chuang, Chang-WenWang, Wen-Chang Chu, Pei-Zen Chang, Yuh-Chung Hu 2012
"The Electromechanical Behavior of a Micro-ring Driven by Traveling Electrostatic Force," Sensors Xiuqian Ye, Yibao Chen, Da-Chih Chen, Kuo-Yi Huang, Yuh-Chung Hu 2012
“Study on the heat transfer of the plate-fin heat sink under impinging jet cooling,” Progress in Computational Fluid Dynamics, 11(3/4), 237-245 (2011). David T.W. Lin, Hung-Yi Li, Yuh-Chung Hu* 2011
“On the Dynamics of the Micro-ring Driven by Traveling Bias Voltages,” Advanced Materials Research, 311-313, 1027-1031 (2011). (EI) Xiuqian Ye, Yibao Chen, Bih-Sheng Hsu, Yuh-Chung Hu*, 2011
“Exporing Power Generation of Single-Chamber Microbial Fuel Cell Using Mixed and Pure Cultures,” Journal of the Taiwan Institute of Chemical Engineers, 41(5), 606-611 (2010). (SCI) Jing-Long Han, Chin-Tsan Wang, Yuh-Chung Hu, Ying Liu, Wen-Ming Chen, Chang-Tang Chang, Hui-Zhong Xu, Bor-Yann Chen 2010
“Review on the Modeling of Electrostatic MEMS,” Sensors, 10 (2010) 6149-6171. (SCI impact factor 1.98) Wan-Chun Chuang, Hsin-Li Lee, Pei-Zen Chang, Yuh-Chung Hu* 2010
“CMOS Compatible Electrochemical Process for Improving Quality Factor of Spiral Microinductors,” Micro & Nano Letters, 5(5) (2010) 266-269. (SCI) Ling-Yi Ding, Wen-Pin Shih*, Yuh-Chung Hu, Yi-Jie Chen, Pei-Zen Chang 2010
“Some Design Considerations on the Electrode Layout of ZnO Pyroelectric Sensors,” Sensors and Materials , 22(8), 417-425, 2010. (SCI impact factor 0.398) Chun-Ching Hsiao, Yuh-Chung Hu, and Rwei-Ching Chang 2010
"A Flexible Proximity Sensor Fully Fabricated by Inkjet Printing,” Sensors, 10(5), 5054-5062. (SCI impact factor 1.98) Chin-Tsan Wang, Kuo-Yi Huang, David T.W. Lin, Wei-Chia Liao, Hua-Wei Lin, Yuh-Chung Hu* 2010
“Novel Biometric Flow Slab Design for Improvement of PEMFC Performance,” Applied Energy, vol. 87, 1366-1375 (SCI impact factor 1.465) Chin-Tsan Wang *, Yuh-Chung Hu, Pei-Lun Zheng 2010
“Biophysical Micromixer,” Sensors, 9, 5379-5389. (SCI impact factor 1.905) Chin-Tsan Wang; Yuh-Chung Hu; Tzu-Yang Hu 2009
“Exploring Threshold Operation Criteria of Biostimulation for Azo Dye Decolorization Using Immobilized Cell Systems,” Bioresource Technology, 100, 5763-5770. (SCI impact factor 4.815) Bor-Yann Chen; Chia-Yi Yen; Wen-Ming Chen; Chan-Tang Chang; Chin-Tsan Wang ; 2009
“Electromechanical Behavior of the Curled Cantilever Beam,” Journal of Micro/Nano Lithography, MEMS, and MOEMS, 8(3), 033020. (SCI impact factor 0.986) Wan-Chun Chuang; Yuh-Chung Hu; Chi-Yuan Lee; Wen-Pin Shih; Pei-Zen Chang 2009
“Integration of Silicon Micro-Hole Arrays as a Gas Diffusion Layer in a Micro Fuel Cell,” International Journal of Hydrogen Energy, 34, 6457-6464. (SCI impact factor 4.028) Chi-Yuan Lee; Shuo-Jen Lee; Yuh-Chung Hu; Wen-Pin Shih; Wei-Yuan Fan; Chih-Wei Chuang 2009
“Residual stresses and mechanical properties of a ZnO pyroelectric sensor,” Theoretical and Applied Fracture Mechanics, 52, 1–6. (SCI impact factor 1.391) C.C. Hsiao; Y.C. Hu; R.C. Chang; C.K. Chao 2009
“Real Time Monitoring of Temperature of a Micro Proton Exchange Membrane Fuel Cell,” Sensors, 9, 1423-1432. (SCI impact factor 1.905) Chi-Yuan Lee; Shuo-Jen Lee; Yuh-Chung Hu; Wen-Pin Shih; Wei-Yuan Fan; Chih-Wei Chuang 2009
“The Fabrication of silicon-based PZT microstructures using aerosol deposition method,” Journal of Micromechanics and Microengineering, 18(5), 055034 (2008). (SCI IF=2.321) Xuan-Yu Wang, Chi-Yuan Lee*, Yuh-Chung Hu, Wen-Pin Shih, Chih-Cheng Lee, Jung-Tang Huang, and Pei-Zen Chang 2008
“Fabrication of a ZnO Pyroelectric Sensor,” Sensors, 8(1), 185-192 (2008). (SCI IF=1.373) Chun-Ching Hsiao, Kuo-Yi Huang, and Yuh-Chung Hu* 2008
“Wafer-level microelectromechanical system structural material test by electrical signal before pull-in,” Applied Physics Letters, 90(12), 121908 (2007). (SCI IF=4.127) Yuh-Chung Hu* and Po-Yuan Huang 2007
“A method for mechanical characterization of capacitive devices at wafer-level via detecting the pull-in voltages of two test-bridges with different lengths,” Journal of Micromechanics and Microengineering, 17(6), 1099-1106 (2007). (SCI IF=2.499) Yuh-Chung Hu*, Wen-Pin Shih, and Guan-De Lee 2007
“ An analytical model considering the fringing fields for calculating the pull-in voltage of micro curled cantilever beams,” Journal of Micromechanics and Microengineering, 17(1), pp.61-67 (2007). (SCI IF=2.499) Yuh-Chung Hu* and Chung-Sheng Wei 2007
“Fabrication of the micro nickel/diamond abrasive pellet array lapping tools using the LIGA-like technology,” Journal of Micromechanics and Microengineering, 17(6), 1130-1138 (2007). (SCI IF=2.499) Shenq-Yih Luo*, Tsung-Han Yu, and Yuh-Chung Hu 2007
“An approximate analytical solution to pull-in voltage of micro bridge with elastic boundary,” Journal of Micromechanics and Microengineering, 17(9), 1870-1876 (2007). (SCI IF=2.499) Yuh-Chung Hu*, Pei-Zen Chang, and Wan-Chun Chuang 2007
“A Closed Form Solution for the Pull-in Voltage of the Micro Bridge,” Tamkang Journal of Science and Engineering, 10(2), 147–150 (2007). (EI) Yuh-Chung Hu* and Guan-De Lee 2007
“Closed form solutions for the pull-in voltage of the micro curled beams subjected to electrostatic loads,” Journal of Micromechanics and Microengineering, 16, pp. 648-655 (2006). (SCI IF=2.499) Yuh-Chung Hu* 2006
“Partial electroded ZnO pyroelectric sensors for responsivity improvement,” Sensors and Actuators A: Physical, 128(1), pp.18-24 (2006). (SCI IF=1.363) C. S. Wei, Y. Y. Lin, Y. C. Hu*, C. W. Wu, C. K. Shih, C. T. Hwang, S. H. Chang 2006
“Identification of Material and Geometrical Parameters for Microstructures by Dynamic Finite Element Model Updating,” Microsystem Technologies, 12, pp. 736-745 (2006). (SCI IF=0.72) Kun-Nan Chen, Wei-Hsin Gau, and Yuh-Chung Hu* 2006
“Mechanical Characterization of Thin Films by the Capacitance-Voltage Measurement of Microstructures,” Materials Science Forum, 505-507, pp.145-150 (2006). (SCI IF=0.399) Yuh-Chung Hu*, Wei-Hsin Gau, and Wei-Hsiang Tu 2006
“Non-linear and linearized algorithms for the Young’s modulus extraction of Thin Films through the C-V measurement of Microstructures,” Journal of Applied Physics, Vol.98, 104504 (2005). (SCI IF=2.498) Yuh-Chung Hu* and Wei-Hsiang Tu 2005
“Some Design Considerations on the Electrostatically Actuated Microstructures,” Sensors and Actuators A: Physical, Vol.112, No.1, pp.155-161 (2004). (SCI IF=1.363) Y. C. Hu*, C. M. Chang, and S. C. Huang 2004
“微機電系統與奈米科技,”科學發展月刊,378期,pp. 56-61 (2004) 李世光,胡毓忠 2004
“我國從MEMS到NEMS的發展策略,”科技發展政策報導,SR9201,pp. 1-10 (2003) 胡毓忠*,李世光,孫美芳 2003
"The frequency response and damping e€ect of three-layer," Computers and Structurs ,76, pp. 577-591( 2000).(SCI) Yuh-Chung Hu* and Shih-Chin Huang 2000
"An Application of Constrained Layer Damping on the Cylindrical Shells Coveying Fluid," Journal of the Chinese Society of Mechanical Engineers," 21(2), pp. 189-200 (2000). (SCI) Yuh-Chung Hu* and Shih-Chin Huang 2000
"Forced Response of Sandwich Ring with Viscoelastic Core Subjected to Traveling Loads," Journal of Acoustical Society of America, 106(1), pp. 202-210 (1999). (SCI) Yuh-Chung Hu* and Shih-Chin Huang 1999
年度 論文名稱
2010 Wan-Chun Chuang, Hsin-Li Lee, David T. W. Lin, Yuh-Chung Hu, Pei-Zen Chang, Ngo Bao Ouyen, “Optimal residual stress in CMOS fabrication,” The 34th National Conference on Theoretical and Applied Mechanics, Yunlin, Taiwan, Nov. 19-20. (2010),
2009 Po-Lin. Liao, Yuh-Chung Hu, Wen-Pin Shih, Xuan-Yu Wang, and Pei-Zen Chang, “Study on the Acoustic Impedance Matching of Human Tissue for Power Transmitting/Charging System of Implanted Biochip,” IEEE NANOMED 2009, PID 89, Oct. 18-21, 2009, Tainan, Taiwan. (EI),
2009 蕭俊卿, 吳奕諼, 趙振綱, 張瑞慶, 胡毓忠, “碲化鉍合金熱電薄膜發電器之設計與製造,” 第十三屆奈米工程暨微系統技術研討會, PID 06-1227, Jul. 9-10, 2009,國立交通大學,新竹,臺灣,
2009 蕭俊卿, 楊雅芬, 趙振綱, 胡毓忠, 張瑞慶, 張培仁, “以二氧化碳雷射改善PZT薄膜於澆電感測器之應用,” 第十三屆奈米工程暨微系統技術研討會, PID 07-1266, Jul. 9-10, 2009,國立交通大學,新竹,臺灣,
2009 L. Y. Ding, T. Wang, Y. C. Hu, W. P. Shih, S. S. Lu, and P. Z. Chang, “CMOS-Compatible Electromechanical Process for RF CMOS Inductors,” IEEE Transducers 2009, 2118-2121, June 21-25, 2009, Denver, CO. USA. (EI),
2009 Chin-Tsan Wang, Tzong-Shyng Leu, Jui-Ming Yum and Yuh-Chung Hu, “Thermal Analysis of Micro Capillary Pumped Loop System,” Proceedings of the Seventh International ASME Conference on Nanochannels, Microchannels and Minichannels (ICNMM 2009), 82197, June 22-24, 2009, Pohang, South Korea,
2009 Chi-Yuan Lee and Yuh-Chung Hu, “Integration of Micro Temperature Sensor and Metal Foil as Gas Diffusion Layer for Micro Fuel Cell,” The Fourth Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems (IEEE NEMS 2009), 164-167, Jan. 5-8, Shenzhen, China. (EI),
2009 Wei-Hsin Gau and Yuh-Chung Hu, “Fabrication and Vibration Analysis of Micro-Cross Beams,” The Fourth Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems (IEEE NEMS 2009), 207-210, Jan. 5-8, Shenzhen, China. (EI),
2008 Yuh-Chung Hu*, Chun-Ching Hsiao, Chien-Ming Lee, and Pao-Cheng Lin, "Flexible PZT Pyroelectric Sensors," Asia-Pacific Conference on Transducers and Micro-Nano Technology 2008 (APCOT 2008), ID0474,
2008 Yuh-Chung Hu*, Jia-Hong Lin, Kuo-Yi Huang, and Wan-Chun Chuang,, “An Electrical Testing Method of the Structural Material of Micro Devices,” The Third Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems (IEEE NEMS 2008), pp. 69-73, Jan. 6-9, Sanya, China.,
2008 David T. W. Lin, Ching-Yu Yang, Ruei-Yong Wang, ,Yuh-Chung Hu*, “An Improved Molecular Dynamics Algorithm for the Larger Momentum Molecular System,” The Third Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems (IEEE NEMS 2008), pp. 397-401, Jan. 6-9, Sanya, China.,
2007 Yuh-Chung Hu*, Chung-Sheng Wei, Chun-Ching Hsiao, and David T. W. Lin,, “Extracting the Young’s Modulus and Stress Gradient of Thin Films from the Pull-in Voltage of a Micro Curled Cantilever Beam,” The Second Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems (IEEE NEMS 2007), Paper No. 092,,
2007 Chung-Sheng Wei, Chun-Ching Hsiao, and Yuh-Chung Hu*,, “The Effects of Mechanical Thin-film Properties on the Pyroelectric Signals,” The Second Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems (IEEE NEMS 2007), Paper No. 107, Jan. 16-19, Bangkok, Thailand. (EI),
2006 胡毓忠*, 黃柏元,, “以測試件之電容-電壓變化反算薄膜材料之楊氏模數,” 中國機械工程學會第二十三屆全國學術研討會論文集, 中華民國九十五年十一月二十四日、二十五日,論文編號: E1-032, 崑山科技大學, 臺灣,台南.,
2006 Yuh-Chung Hu* and Guan-De Lee,, “A Closed Form Solution for the Pull-in Voltage of the Micro Bridge,” 第十屆奈米工程暨微系統技術研討會, 中華民國九十五年十一月三十日、十二月一日,論文編號: 0090,財團法人工業技術研究院,臺灣,新竹.,
2006 Yuh-Chung Hu*,, “On the Dynamic and Stability Analysis of the Microdiaphragm for Electrostatic Micropumps,” 17th International Symposium on Transport Phenomena (ISTP-17), Paper No. 3-C-I-3, Sep. 4 – 8, Toyama, Japan.,
2006 Yuh-Chung Hu*, David T. W. Lin, and Guan-De Lee,, “A Closed Form Solution for the Pull-in Voltage of the Micro Bridge with Initial Stress subjected to Electrostatic Loads,” The First Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems (IEEE NEMS 2006), pp.759-763, Jan. 18-,
2006 David T. W. Lin and Yuh-Chung Hu*, “A Molecular Dynamics Study of Thermal Ablation,” The First Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems (IEEE NEMS 2006), pp. 596-600, Jan. 18-21, Zhuhai, China. (EI),
2005 Yuh-Chung Hu*, Wei-Hsin Gau, and Wei-Hsiang Tu,, “High Precision Young’s Modulus Extraction of Thin Films through Measuring the Electric-Circuit Behavior of Microstructures,” The ASME/Pacific Rim Technical Conference and Exhibition on Integration and Packaging of MEMS, NEMS, and Electronic Systems, Pape,
2005 Wei-Hsin Gau, Yuh-Chung Hu, and Wei-Hsiang Tu,, “The Study of the Design in Micro Modal Actuators Using the Holographic Interferometry,” The ASME/Pacific Rim Technical Conference and Exhibition on Integration and Packaging of MEMS, NEMS, and Electronic Systems, Paper No. IPACK2005-73333, July 17-22, 20,
2005 Yuh-Chung Hu* and Xiang-Jun Chen,, “A Valve-less Micropump Driven by Continuous Electrowetting (CEW) Actuation,” 16th International Symposium on Transport Phenomena (ISTP-16), Paper ID 062, Aug. 29 – Sep. 01, Prague, Czech Republic.,
2005 Yuh-Chung Hu*, Wei-Hsin Gau, and Wei-Hsiang Tu,, “Mechanical Characterization of Thin Films by the Capacitance-Voltage Measurement of Microstructures,” 2005 International Conference on Advanced Manufacture (ICAM2005), Paper No. A061, Nov. 28 - Dec.02, Taipei, Taiwan.,
2005 高維新, 胡毓忠*, 賴彥豪, 郭智宏,, “吸入式光碟機電腦動態模擬分析,” 中國機械工程學會第二十二屆全國學術研討會論文集, 中華民國九十四年十一月二十五日、二十六日論文編號: C9-034, 國立中央大學臺灣、中壢.,
2004 Yuh-Chung Hu*, Yung-Hsiang Wang, and Shyh-Chin Huang,, “On the Dynamic and Stability Analysis of Electrostatically Actuated Microstructures,” The 1st International Symposium on Micro & Nano Technology, Paper No. III-2-01, 14-17 March, Honolulu, Hawaii, USA.,
年度 計畫名稱 參與人 職稱/擔任之工作 計畫期間 補助/委託或合作機構
100 以噴墨印刷製作可撓性焦電感測器陣列(2/2) 胡毓忠 Yuh-Chung Hu 計畫主持人 1970.01.01 ~ 1970.01.01 國科會
100 承受移動靜電力之微結構的動態特性與穩定性分析及其應用研究 胡毓忠 Yuh-Chung Hu 計畫主持人 1970.01.01 ~ 1970.01.01 國科會
99 以噴墨印刷製作可撓性焦電感測器陣列 胡毓忠 主持人 1970.01.01 ~ 1970.01.01 行政院國家科學委員會
98 承受移動靜電力之微結構的電彈性分析及其於微機械式單震盪器帶通濾波 胡毓忠 主持人 1970.01.01 ~ 1970.01.01 行政院國家科學委員會
98 石油化工產業之減廢回收再利用技術研發計畫 胡毓忠 老師 分項計畫主持人 1970.01.01 ~ 1970.01.01 經濟部技術處
98 TFT-LCD廢玻璃及工業廢棄物焚化底渣取代矽砂作為水泥纖維板之研發 胡毓忠 老師 共同主持人 1970.01.01 ~ 1970.01.01 教育部
98 運用解析方法及精簡演算法建立LCD Cell強度分析之模型 胡毓忠 共同主持人 1970.01.01 ~ 1970.01.01 奇美電子
98 橋狀結構模型建立技術 胡毓忠 主持人 1970.01.01 ~ 1970.01.01 財團法人工業技術研究院
97 可撓性氧化鋅焦電感測器研發NSC 97-2221-E-211-006- 胡毓忠 主持人 1970.01.01 ~ 1970.01.01 行政院國家科學委員會
97 仿生人形機器人之發展-子計畫二:人工眼睛之設計與製作NSC 97-2221-E-002-162-MY3 胡毓忠 共同主持人 1970.01.01 ~ 1970.01.01 行政院國家科學委員會
97 生醫感測網路上身晶片系統-總計畫:生醫感測網路上身晶片系統NSC 97-2221-E-002-152-MY3 胡毓忠 老師 共同主持人 1970.01.01 ~ 1970.01.01 行政院國家科學委員會
97 生醫感測網路上身晶片系統-子計畫三:生醫感測器網路之壓電式超聲波能源轉換器NSC 97-2221-E-002-151-MY3 胡毓忠 老師 共同主持人 1970.01.01 ~ 1970.01.01 行政院國家科學委員會
95 以全像式干涉術檢驗微扭轉鏡面元件之設計(95-2221-E-211-024-) 胡毓忠 共同主持人 1970.01.01 ~ 1970.01.01 行政院國家科學委員會
95 以微測試結構之電路行為萃取薄膜材料之楊氏模數,剪切模數,及殘留應力的技術研發(95-2221-E-211-008-MY2) 胡毓忠 主持人 1970.01.01 ~ 1970.01.01 行政院國家科學委員會
95 懸臂式生化感測器之最佳化設計,製作與實驗驗證(95-2221-E-236-007-) 胡毓忠 共同主持人 1970.01.01 ~ 1970.01.01 行政院國家科學委員會
94 以最佳化方法萃取薄膜微機械結構之機械性質(94-2212-E-236-001-) 胡毓忠 共同主持人 1970.01.01 ~ 1970.01.01 行政院國家科學委員會
94 全電信號之微機電薄膜機械性質檢測技術與標準測試元件之研發(94-2212-E-211-006-) 胡毓忠 主持人 1970.01.01 ~ 1970.01.01 行政院國家科學委員會
93 以全像式干涉術研究微型模態驅動器的設計(93-2215-E-211-003- ) 胡毓忠 共同主持人 1970.01.01 ~ 1970.01.01 行政院國家科學委員會
93 應用連續電濕潤驅動方式之低電壓低耗能之無閥式微泵浦(93-2212-E-211-010- ) 胡毓忠 主持人 1970.01.01 ~ 1970.01.01 行政院國家科學委員會
92 靜電驅動式微結構之動態與穩定性分析(92-2218-E-211-003- ) 胡毓忠 主持人 1970.01.01 ~ 1970.01.01 行政院國家科學委員會
學校名稱 系所 學位
國立臺灣科技大學 機械工程系 博士