Orbit

胡 毓忠 Yuh-Chung Hu
专任
职称 教授
姓名 胡 毓忠 Yuh-Chung Hu
联络电话 03-9317469
电子邮件 ychu@niu.edu.tw
研究专长 微机电系统
工业传感器
智慧机械
智慧制造
振动学与声学
授课领域 微机电系统
工业传感器
智慧机械
智慧制造
振动学与声学
学历 国立台湾科技大学 机械工程 博士
年度 论文名称
2013 Wei-Hsiang Tu, Pei-Zen Chang, Chih-Kung Lee, Yuh-Chung Hu, "On the Dynamics of a Micro-beam Driven by a Traveling Harmonic Force ," Advanced Materials Research
2013 W. C. Chuang, David T. W. Lin, Y.C. Hu, H.L. Lee, C.H. Cheng, P.Z. Chang, N. B. Quyen, "A Method Integrating Optimal Algorithm and FEM on CMOS Residual Stress ," Journal of Mechanics
2013 胡毓忠, 廖伟珈, "以喷墨印刷制作可挠性焦电传感器 ," 微系统暨奈米科技协会会刊,第29期
2013 Chao-Kuang Chen, David T.W. Lin, Yung-der Juang, Yuh-Chung Hu, Yen Ting Kuo, Chu Yu Chen, "The Innovated Flexible Surface Acoustic Wave Devices on Fully InkJet Printing Technology," Smart Science
2013 Yuh-Chung Hu, David T.W. Lin, Hai-Lin Lee, Pei-Zen Chang, "A Solution Processed ZnO Thin Film," Applied Mechanics and Materials
2013 Tsung Chi Hsieh, Kuan-Ju Chen, David T. W. Lin, Yang Der Juang, Yuh Chung Hu, "The Improvement of Parameters of Manufacturing Process on Flexible Surface Acoustic Wave Device ," Applied Mechanics and Materials
2012 Wan-Chun Chuang, Yuh-Chung Hu, Pei-Zen Chang, "CMOS-MEMS Test-Key for Extracting Wafer-Level Mechanical Properties," Sensors
2012 Wei-Hsiang Tu, Wan-Chun Chuang, Wen-Chang Chu, Chih-Kung Lee, Pei-Zen Chang, Yuh-Chung Hu, "Etching holes effects on CMOS-MEMS capacitive structure," Journal of Intelligent Material Systems and Structures
2012 Ling-Yi Ding, Jen-Chieh Li, Wen-Pin Shih, Mao-Shin Lin, Yuh-Chung Hu, Pei-Zen Chang, "An Analytical Model for Instant Design of LCD Cell with Photospacer under Gravity and Local Loading ," Journal of the Society for Information Display
2012 David T.W. Lin*, Yu Chung Hu, Chin-Hsiang Cheng,, “The Optimization of the Thermal Response on the ZnO Flexible Pyroelectric Film Temperature Sensor,” IEEE Sensors
2012 Wan-Chun Chuang, Chang-WenWang, Wen-Chang Chu, Pei-Zen Chang, Yuh-Chung Hu, "The fringe capacitance formula of microstructures," The Micromechanics and Microengineering
2012 Xiuqian Ye, Yibao Chen, Da-Chih Chen, Kuo-Yi Huang, Yuh-Chung Hu, "The Electromechanical Behavior of a Micro-ring Driven by Traveling Electrostatic Force," Sensors
2011 David T.W. Lin, Hung-Yi Li, Yuh-Chung Hu*, “Study on the heat transfer of the plate-fin heat sink under impinging jet cooling,” Progress in Computational Fluid Dynamics, 11(3/4), 237-245 (2011).
2011 Xiuqian Ye, Yibao Chen, Bih-Sheng Hsu, Yuh-Chung Hu*,, “On the Dynamics of the Micro-ring Driven by Traveling Bias Voltages,” Advanced Materials Research, 311-313, 1027-1031 (2011). (EI)
2010 Jing-Long Han, Chin-Tsan Wang, Yuh-Chung Hu, Ying Liu, Wen-Ming Chen, Chang-Tang Chang, Hui-Zhong Xu, Bor-Yann Chen, “Exporing Power Generation of Single-Chamber Microbial Fuel Cell Using Mixed and Pure Cultures,” Journal of the Taiwan Institute of Chemical Engineers, 41(5), 606-611 (2010). (SCI)
2010 Wan-Chun Chuang, Hsin-Li Lee, Pei-Zen Chang, Yuh-Chung Hu*, “Review on the Modeling of Electrostatic MEMS,” Sensors, 10 (2010) 6149-6171. (SCI impact factor 1.98)
2010 Ling-Yi Ding, Wen-Pin Shih*, Yuh-Chung Hu, Yi-Jie Chen, Pei-Zen Chang, “CMOS Compatible Electrochemical Process for Improving Quality Factor of Spiral Microinductors,” Micro & Nano Letters, 5(5) (2010) 266-269. (SCI)
2010 Chun-Ching Hsiao, Yuh-Chung Hu, and Rwei-Ching Chang, “Some Design Considerations on the Electrode Layout of ZnO Pyroelectric Sensors,” Sensors and Materials , 22(8), 417-425, 2010. (SCI impact factor 0.398)
2010 Chin-Tsan Wang, Kuo-Yi Huang, David T.W. Lin, Wei-Chia Liao, Hua-Wei Lin, Yuh-Chung Hu*, "A Flexible Proximity Sensor Fully Fabricated by Inkjet Printing,” Sensors, 10(5), 5054-5062. (SCI impact factor 1.98)
2010 Chin-Tsan Wang *, Yuh-Chung Hu, Pei-Lun Zheng, “Novel Biometric Flow Slab Design for Improvement of PEMFC Performance,” Applied Energy, vol. 87, 1366-1375 (SCI impact factor 1.465)
2009 Chin-Tsan Wang; Yuh-Chung Hu; Tzu-Yang Hu, “Biophysical Micromixer,” Sensors, 9, 5379-5389. (SCI impact factor 1.905)
2009 Bor-Yann Chen; Chia-Yi Yen; Wen-Ming Chen; Chan-Tang Chang; Chin-Tsan Wang ;, “Exploring Threshold Operation Criteria of Biostimulation for Azo Dye Decolorization Using Immobilized Cell Systems,” Bioresource Technology, 100, 5763-5770. (SCI impact factor 4.815)
2009 Wan-Chun Chuang; Yuh-Chung Hu; Chi-Yuan Lee; Wen-Pin Shih; Pei-Zen Chang, “Electromechanical Behavior of the Curled Cantilever Beam,” Journal of Micro/Nano Lithography, MEMS, and MOEMS, 8(3), 033020. (SCI impact factor 0.986)
2009 Chi-Yuan Lee; Shuo-Jen Lee; Yuh-Chung Hu; Wen-Pin Shih; Wei-Yuan Fan; Chih-Wei Chuang, “Integration of Silicon Micro-Hole Arrays as a Gas Diffusion Layer in a Micro Fuel Cell,” International Journal of Hydrogen Energy, 34, 6457-6464. (SCI impact factor 4.028)
2009 C.C. Hsiao; Y.C. Hu; R.C. Chang; C.K. Chao, “Residual stresses and mechanical properties of a ZnO pyroelectric sensor,” Theoretical and Applied Fracture Mechanics, 52, 1–6. (SCI impact factor 1.391)
2009 Chi-Yuan Lee; Shuo-Jen Lee; Yuh-Chung Hu; Wen-Pin Shih; Wei-Yuan Fan; Chih-Wei Chuang, “Real Time Monitoring of Temperature of a Micro Proton Exchange Membrane Fuel Cell,” Sensors, 9, 1423-1432. (SCI impact factor 1.905)
2008 Xuan-Yu Wang, Chi-Yuan Lee*, Yuh-Chung Hu, Wen-Pin Shih, Chih-Cheng Lee, Jung-Tang Huang, and Pei-Zen Chang, “The Fabrication of silicon-based PZT microstructures using aerosol deposition method,” Journal of Micromechanics and Microengineering, 18(5), 055034 (2008). (SCI IF=2.321)
2008 Chun-Ching Hsiao, Kuo-Yi Huang, and Yuh-Chung Hu*, “Fabrication of a ZnO Pyroelectric Sensor,” Sensors, 8(1), 185-192 (2008). (SCI IF=1.373)
2007 Yuh-Chung Hu* and Po-Yuan Huang, “Wafer-level microelectromechanical system structural material test by electrical signal before pull-in,” Applied Physics Letters, 90(12), 121908 (2007). (SCI IF=4.127)
2007 Yuh-Chung Hu*, Wen-Pin Shih, and Guan-De Lee, “A method for mechanical characterization of capacitive devices at wafer-level via detecting the pull-in voltages of two test-bridges with different lengths,” Journal of Micromechanics and Microengineering, 17(6), 1099-1106 (2007). (SCI IF=2.499)
2007 Yuh-Chung Hu* and Chung-Sheng Wei, “ An analytical model considering the fringing fields for calculating the pull-in voltage of micro curled cantilever beams,” Journal of Micromechanics and Microengineering, 17(1), pp.61-67 (2007). (SCI IF=2.499)
2007 Shenq-Yih Luo*, Tsung-Han Yu, and Yuh-Chung Hu, “Fabrication of the micro nickel/diamond abrasive pellet array lapping tools using the LIGA-like technology,” Journal of Micromechanics and Microengineering, 17(6), 1130-1138 (2007). (SCI IF=2.499)
2007 Yuh-Chung Hu*, Pei-Zen Chang, and Wan-Chun Chuang, “An approximate analytical solution to pull-in voltage of micro bridge with elastic boundary,” Journal of Micromechanics and Microengineering, 17(9), 1870-1876 (2007). (SCI IF=2.499)
2007 Yuh-Chung Hu* and Guan-De Lee, “A Closed Form Solution for the Pull-in Voltage of the Micro Bridge,” Tamkang Journal of Science and Engineering, 10(2), 147–150 (2007). (EI)
2006 Yuh-Chung Hu*, “Closed form solutions for the pull-in voltage of the micro curled beams subjected to electrostatic loads,” Journal of Micromechanics and Microengineering, 16, pp. 648-655 (2006). (SCI IF=2.499)
2006 C. S. Wei, Y. Y. Lin, Y. C. Hu*, C. W. Wu, C. K. Shih, C. T. Hwang, S. H. Chang, “Partial electroded ZnO pyroelectric sensors for responsivity improvement,” Sensors and Actuators A: Physical, 128(1), pp.18-24 (2006). (SCI IF=1.363)
2006 Kun-Nan Chen, Wei-Hsin Gau, and Yuh-Chung Hu*, “Identification of Material and Geometrical Parameters for Microstructures by Dynamic Finite Element Model Updating,” Microsystem Technologies, 12, pp. 736-745 (2006). (SCI IF=0.72)
2006 Yuh-Chung Hu*, Wei-Hsin Gau, and Wei-Hsiang Tu, “Mechanical Characterization of Thin Films by the Capacitance-Voltage Measurement of Microstructures,” Materials Science Forum, 505-507, pp.145-150 (2006). (SCI IF=0.399)
2005 Yuh-Chung Hu* and Wei-Hsiang Tu, “Non-linear and linearized algorithms for the Young’s modulus extraction of Thin Films through the C-V measurement of Microstructures,” Journal of Applied Physics, Vol.98, 104504 (2005). (SCI IF=2.498)
2004 Y. C. Hu*, C. M. Chang, and S. C. Huang, “Some Design Considerations on the Electrostatically Actuated Microstructures,” Sensors and Actuators A: Physical, Vol.112, No.1, pp.155-161 (2004). (SCI IF=1.363)
2004 李世光,胡毓忠, “微机电系统与奈米科技,”科学发展月刊,378期,pp. 56-61 (2004)
2003 胡毓忠*,李世光,孙美芳, “我国从MEMS到NEMS的发展策略,”科技发展政策报导,SR9201,pp. 1-10 (2003)
2000 Yuh-Chung Hu* and Shih-Chin Huang, "The frequency response and damping e€ect of three-layer," Computers and Structurs ,76, pp. 577-591( 2000).(SCI)
2000 Yuh-Chung Hu* and Shih-Chin Huang, "An Application of Constrained Layer Damping on the Cylindrical Shells Coveying Fluid," Journal of the Chinese Society of Mechanical Engineers," 21(2), pp. 189-200 (2000). (SCI)
1999 Yuh-Chung Hu* and Shih-Chin Huang, "Forced Response of Sandwich Ring with Viscoelastic Core Subjected to Traveling Loads," Journal of Acoustical Society of America, 106(1), pp. 202-210 (1999). (SCI)
年度 论文名称
2010 Wan-Chun Chuang, Hsin-Li Lee, David T. W. Lin, Yuh-Chung Hu, Pei-Zen Chang, Ngo Bao Ouyen, “Optimal residual stress in CMOS fabrication,” The 34th National Conference on Theoretical and Applied Mechanics, Yunlin, Taiwan, Nov. 19-20. (2010),
2009 Po-Lin. Liao, Yuh-Chung Hu, Wen-Pin Shih, Xuan-Yu Wang, and Pei-Zen Chang, “Study on the Acoustic Impedance Matching of Human Tissue for Power Transmitting/Charging System of Implanted Biochip,” IEEE NANOMED 2009, PID 89, Oct. 18-21, 2009, Tainan, Taiwan. (EI),
2009 萧俊卿, 吴奕谖, 赵振纲, 张瑞庆, 胡毓忠, “碲化铋合金热电薄膜发电器之设计与制造,” 第十三届奈米工程暨微系统技术研讨会, PID 06-1227, Jul. 9-10, 2009,国立交通大学,新竹,台湾,
2009 萧俊卿, 杨雅芬, 赵振纲, 胡毓忠, 张瑞庆, 张培仁, “以二氧化碳雷射改善PZT薄膜于浇电传感器之应用,” 第十三届奈米工程暨微系统技术研讨会, PID 07-1266, Jul. 9-10, 2009,国立交通大学,新竹,台湾,
2009 L. Y. Ding, T. Wang, Y. C. Hu, W. P. Shih, S. S. Lu, and P. Z. Chang, “CMOS-Compatible Electromechanical Process for RF CMOS Inductors,” IEEE Transducers 2009, 2118-2121, June 21-25, 2009, Denver, CO. USA. (EI),
2009 Chin-Tsan Wang, Tzong-Shyng Leu, Jui-Ming Yum and Yuh-Chung Hu, “Thermal Analysis of Micro Capillary Pumped Loop System,” Proceedings of the Seventh International ASME Conference on Nanochannels, Microchannels and Minichannels (ICNMM 2009), 82197, June 22-24, 2009, Pohang, South Korea,
2009 Chi-Yuan Lee and Yuh-Chung Hu, “Integration of Micro Temperature Sensor and Metal Foil as Gas Diffusion Layer for Micro Fuel Cell,” The Fourth Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems (IEEE NEMS 2009), 164-167, Jan. 5-8, Shenzhen, China. (EI),
2009 Wei-Hsin Gau and Yuh-Chung Hu, “Fabrication and Vibration Analysis of Micro-Cross Beams,” The Fourth Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems (IEEE NEMS 2009), 207-210, Jan. 5-8, Shenzhen, China. (EI),
2008 Yuh-Chung Hu*, Chun-Ching Hsiao, Chien-Ming Lee, and Pao-Cheng Lin, "Flexible PZT Pyroelectric Sensors," Asia-Pacific Conference on Transducers and Micro-Nano Technology 2008 (APCOT 2008), ID0474,
2008 Yuh-Chung Hu*, Jia-Hong Lin, Kuo-Yi Huang, and Wan-Chun Chuang,, “An Electrical Testing Method of the Structural Material of Micro Devices,” The Third Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems (IEEE NEMS 2008), pp. 69-73, Jan. 6-9, Sanya, China.,
2008 David T. W. Lin, Ching-Yu Yang, Ruei-Yong Wang, ,Yuh-Chung Hu*, “An Improved Molecular Dynamics Algorithm for the Larger Momentum Molecular System,” The Third Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems (IEEE NEMS 2008), pp. 397-401, Jan. 6-9, Sanya, China.,
2007 Yuh-Chung Hu*, Chung-Sheng Wei, Chun-Ching Hsiao, and David T. W. Lin,, “Extracting the Young’s Modulus and Stress Gradient of Thin Films from the Pull-in Voltage of a Micro Curled Cantilever Beam,” The Second Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems (IEEE NEMS 2007), Paper No. 092,,
2007 Chung-Sheng Wei, Chun-Ching Hsiao, and Yuh-Chung Hu*,, “The Effects of Mechanical Thin-film Properties on the Pyroelectric Signals,” The Second Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems (IEEE NEMS 2007), Paper No. 107, Jan. 16-19, Bangkok, Thailand. (EI),
2006 胡毓忠*, 黄柏元,, “以测试件之电容-电压变化反算薄膜材料之杨氏模数,” 中国机械工程学会第二十三届全国学术研讨会论文集, 中华民国九十五年十一月二十四日、二十五日,论文编号: E1-032, 崑山科技大学, 台湾,台南.,
2006 Yuh-Chung Hu* and Guan-De Lee,, “A Closed Form Solution for the Pull-in Voltage of the Micro Bridge,” 第十届奈米工程暨微系统技术研讨会, 中华民国九十五年十一月三十日、十二月一日,论文编号: 0090,财团法人工业技术研究院,台湾,新竹.,
2006 Yuh-Chung Hu*,, “On the Dynamic and Stability Analysis of the Microdiaphragm for Electrostatic Micropumps,” 17th International Symposium on Transport Phenomena (ISTP-17), Paper No. 3-C-I-3, Sep. 4 – 8, Toyama, Japan.,
2006 Yuh-Chung Hu*, David T. W. Lin, and Guan-De Lee,, “A Closed Form Solution for the Pull-in Voltage of the Micro Bridge with Initial Stress subjected to Electrostatic Loads,” The First Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems (IEEE NEMS 2006), pp.759-763, Jan. 18-,
2006 David T. W. Lin and Yuh-Chung Hu*, “A Molecular Dynamics Study of Thermal Ablation,” The First Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems (IEEE NEMS 2006), pp. 596-600, Jan. 18-21, Zhuhai, China. (EI),
2005 Yuh-Chung Hu*, Wei-Hsin Gau, and Wei-Hsiang Tu,, “High Precision Young’s Modulus Extraction of Thin Films through Measuring the Electric-Circuit Behavior of Microstructures,” The ASME/Pacific Rim Technical Conference and Exhibition on Integration and Packaging of MEMS, NEMS, and Electronic Systems, Pape,
2005 Wei-Hsin Gau, Yuh-Chung Hu, and Wei-Hsiang Tu,, “The Study of the Design in Micro Modal Actuators Using the Holographic Interferometry,” The ASME/Pacific Rim Technical Conference and Exhibition on Integration and Packaging of MEMS, NEMS, and Electronic Systems, Paper No. IPACK2005-73333, July 17-22, 20,
2005 Yuh-Chung Hu* and Xiang-Jun Chen,, “A Valve-less Micropump Driven by Continuous Electrowetting (CEW) Actuation,” 16th International Symposium on Transport Phenomena (ISTP-16), Paper ID 062, Aug. 29 – Sep. 01, Prague, Czech Republic.,
2005 Yuh-Chung Hu*, Wei-Hsin Gau, and Wei-Hsiang Tu,, “Mechanical Characterization of Thin Films by the Capacitance-Voltage Measurement of Microstructures,” 2005 International Conference on Advanced Manufacture (ICAM2005), Paper No. A061, Nov. 28 - Dec.02, Taipei, Taiwan.,
2005 高维新, 胡毓忠*, 赖彦豪, 郭智宏,, “吸入式光盘机电脑动态模拟分析,” 中国机械工程学会第二十二届全国学术研讨会论文集, 中华民国九十四年十一月二十五日、二十六日论文编号: C9-034, 国立中央大学台湾、中坜.,
2004 Yuh-Chung Hu*, Yung-Hsiang Wang, and Shyh-Chin Huang,, “On the Dynamic and Stability Analysis of Electrostatically Actuated Microstructures,” The 1st International Symposium on Micro & Nano Technology, Paper No. III-2-01, 14-17 March, Honolulu, Hawaii, USA.,
年度 计画名称 参与人 职称/担任之工作 计画期间 补助/委讬或合作机构
2017 导入SkyMars云端运算系统之智慧工具机主轴-子计画二:导入SkyMars 的智慧主轴之轴承温度传感器(II)(MOST 106-2221-E-197-014 -) 主持人 2017.08.14 ~ 2018.07.14 科技部
2017 工具机智慧主轴之热特征辨识系统(NARL-IOT-106-017) 主持人 2017.06.14 ~ 2018.05.14 财团法人国家实验研究院
2016 导入SkyMars云端运算系统之智慧型工具机主轴-子计画二:导入SkyMars的智慧主轴之轴承温度传感器(I) (MOST105-2221-E-197-012-) 主持人 2016.08.14 ~ 2017.07.14 科技部
2016 科技部开发型产学合作计画−新型音叉式物位计 (MOST105-2622-E-197-001-CC2)(106年度科技部产学合作计画成果特优奖) 主持人 2016.02.14 ~ 2017.01.14 科技部、桓达科技股份有限公司
2016 科技部开发型产学合作计画−多重振膜式微机电麦克风(2/2) (MOST 105-2622-E-197-003-CC2) 主持人 2016.02.14 ~ 2017.01.14 科技部、美律实业股份有限公司
2015 科技部开发型产学合作计画−多重振膜式微机电麦克风(1/2) (MOST104-2622-E-197-001-CC2) 主持人 2015.02.14 ~ 2016.01.14 科技部、美律实业股份有限公司
2014 新型微介电弹性体致动器 (MOST103-2221-E-197-015-MY2) 主持人 2014.08.14 ~ 2016.07.14 科技部
2011 以喷墨印刷制作可挠性焦电传感器阵列(2/2)(MOST100-2628-E-197-004) 胡毓忠 Yuh-Chung Hu 主持人 2011.08.14 ~ 2011.07.14 国科会
2011 (优秀年轻学者研究计画)承受移动静电力之微结构的动态特性与稳定性分析及其应用研究(MOST100-2628-E-197-001-MY3)(101年度国科会自动化学门成果发表会佳作奖) 胡毓忠 Yuh-Chung Hu 主持人 2011.08.14 ~ 2014.07.14 国科会
2010 以喷墨印刷制作可挠性焦电传感器阵列(1/2)(MOST99-2628-E-197-003) 胡毓忠 主持人 2010.08.14 ~ 2011.07.14 国科会
2009 承受移动静电力之微结构的电弹性分析及其于微机械式单震荡器带通濾波(MOST98-2221-E-197-017) 胡毓忠 主持人 2009.08.14 ~ 2010.07.14 国科会
2009 桥状结构模型建立技术 胡毓忠 主持人 2009.08.14 ~ 2010.07.14 财团法人工业技术研究院
2008 可挠性氧化锌焦电传感器研发(NSC 97-2221-E-211-006-) 胡毓忠 主持人 2008.08.14 ~ 2009.07.14 行政院国家科学委员会
2006 以微测试结构之电路行为萃取薄膜材料之杨氏模数,剪切模数,及残留应力的技术研发(95-2221-E-211-008-MY2) 胡毓忠 主持人 2006.08.14 ~ 2008.07.14 行政院国家科学委员会
2005 全电信号之微机电薄膜机械性质检测技术与标准测试元件之研发(NSC 94-2212-E-211-006-) 胡毓忠 主持人 2005.08.14 ~ 2006.07.14 行政院国家科学委员会
2004 应用连续电湿润驱动方式之低电压低耗能之无阀式微泵浦(NSC 93-2212-E-211-010- ) 胡毓忠 主持人 2004.08.14 ~ 2005.07.14 行政院国家科学委员会
2003 静电驱动式微结构之动态与稳定性分析(NSC 92-2218-E-211-003- ) 胡毓忠 主持人 2003.08.14 ~ 2004.07.14 行政院国家科学委员会
学校名称 系所 学位
国立台湾科技大学 机械工程系 博士