Orbit

方 治国
专任
职称 教授
姓名 方 治国
联络电话 03-9317461, 0919997894
电子邮件 ckfang@niu.edu.tw
研究专长 磨润工程(摩擦、磨耗、润滑)、3D金属打印、雷射表面复层、奈米检测(原子力显微术)、田口式实验设计与品质管理、材料破损分析(腐蚀、磨耗、破裂、非破坏性检测)
授课领域 奈米检测技术、仿生科技、磨润工程、非破坏性检测、实验计画法、雷射技术
学历 美国密西根大学 机械工程 博士
年度 论文名称
2016 C.-K. Fang, Smart Adhesion from Hierarchical Surface Construction in Gecko’s Foot Pads and Its Engineering Applications, Bulletin of College of Engineering, National Ilan University, No. 11.
2016 T.J. Wu, C.K. Fang, and G.C. Tsai, Fluid dynamic characteristic analysis of an eccentric butterfly valve, Applied System Innovation, Meen, Prior & Lam (Eds), Taylor & Francis Group, London, pp. 935-940.
2015 Design Optimization of Engine Mount System, International Journal of Engineering Innovation and Research (IJEIR), Vol. 4, Iss. 4, pp. 603-606.
2014 C.-K. Fang, Tribological Characteristics and Biomimetic Applications of Living Structures and Tissues – A Review
2013 Chih-Kuo Fang, From Synovial Joint to Biomimetic Tribological Engineering
2012 Fang, Chih-Kuo and Chen, Hung-Wei, Manufacture of Car Wiper Tribological Tester and Corresponding Experimental Analysis
2011 Fang, Chih-Kuo, Structural Characterization of DLC films Using Raman Spectroscopy
2011 Fang, C.K. et al., Direct Electro-Magnetic Mechanical Analysis of U-Shape Coil
2010 Fang, Chih-Kuo, Deposition of Carbon Films by Excimer Laser Irradiation
2009 Fang, Chih-Kuo, Mechanical and Tribological Investigations on Carbon Allotropes
2007 方治国, 第四次工业革命与奈米科技
2003 Fang, C.-K, Effects of Aging Time on the Wear Resistance of Alumina Reinforced MMCs
2003 Fang, C.-K, Micro/Nanotribology Issues in the MEMS Devices
2003 Fang, C.-K, Heat Treatment and Wear Resistance of Metal Matrix Composites
2002 Fang, C.-K., Huang, C.C., and Chuang, T.H, Residual Stresses in Laser Welds
2002 Fang, C.-K, Nanotechnology Revolution – Molecular Manufacturing
2002 Fang, C.-K, Properties and Applications of Carbon Nanotubes
2000 Fang, C.-K. and Chuang, T.H., Temperature Effects on the Erosion of Aluminum Alloy,
2000 Fang, C.-K, Deterioration of Building Materials and Air Pollution Factors,
1999 Fang, C.-K., Huang, C.C., and Chuang, T.H., Synergistic Effects of Wear and Corrosion for Al2O3 Particulate-Reinforced 6061 Aluminum Matrix Composites
1999 Fang, C.-K. and Chuang, T.H., Erosion of SS41 Steel by Sand Blasting
1999 Fang, C.-K. and Chuang, T.H., Surface Morphologies and Erosion Rates of Metallic Building Materials after Sandblasting
1999 Fang, C.-K. and Chuang, T.H., The Effect of Humidity on the Erosive Wear of 6063 Al Alloy,
1999 Fang, C.-K., Fang, R.L., Weng, W.P., and Chuang, T.H., Applicability of Ultrasonic Testing on the Determination of Volume Fraction of Particulates in Alumina Reinforced Aluminum Matrix Composites,
1999 Fang, C.-K, Environmental Factors on Wear Wastage of Metallic Building Materials by Solid Particle Impingement,
1998 Fang, C.-K, Principles of Acoustic Emission and Its Applications,
1998 Fang, C.-K., Chuang, T. H., and Lee, S. L, The Synergistic Effects of Wear and Corrosion in SAE 304 Stainless Steel,
1998 Fang, C.-K, Acoustic Emission - a Non-destructive Testing Technology,
1997 Fang, C.-K., Kannatey-Asibu Jr., E., and Barber, J. R,, Crack-tip Equation of Motion Due to Non-uniform Residual Stresses in a Weldment
1997 Fang, C.-K., Kannatey-Asibu Jr., E., and Barber, J. R,, Far-field Response of Acoustic Emission from Cracking in a Weldment
1997 Fang, C.-K., Acoustic Emission Surface Response from Mixed-mode Cracking
1997 Fang, C.-K. and Lin, Y.-M., Analysis of Climatic Factors on the Deterioration of Building Materials in Taiwan
1995 Fang, C.-K., Kannatey-Asibu Jr., E., and Barber, J. R,, Acoustic Emission Investigation of Cold Cracking in Gas Metal Arc Welding of AISI 4340 Steel
年度 论文名称
2015 Huang, K.Y., Tsai, G.C., Guo, G.J., and Fang, C.K., Power Analysis of Small Wind Turbine, International Conference on Environmental Science and Sustainable Development (ICESSD 2015), Bangkok, Thailand, October 25 – 26, 2015, pp. 95-100.,
2015 G.C. Tsai, J.Q. Guo, and C.K. Fang, Structural Analysis of Offshore Wind Blade with the Typhoon Effect, 2015 Conference on Precision Machinery and Manufacturing Technology-PMMT 2015, Ping-tung, Taiwan, R.O.C., May. 22-24, 2015, pp. A040-1 –A040-6.,
2015 方治国、江秉豪, 以电浆活化改善汽车雨刷EPDM胶条之摩擦性能, Proceedings of the 32th National Conference of the Chinese Society of Mechanical Engineers, Kaohsiung, Taiwan, R.O.C., Chinese Society of Mechanical Engineers, Dec. 11-12, 2015, #0542.,
2015 C.-K. Fang and C.-T. Ping, Tribological Properties of Lubricating Oils Containing Graphene, Proceedings of the 32th National Conference of the Chinese Society of Mechanical Engineers, Kaohsiung, Taiwan, R.O.C., Chinese Society of Mechanical Engineers, Dec. 11-12, 2015, #2381.,
2015 Ting-Jiun Wu, Chih-Kuo Fang, Gwo-Chung Tsai, Fluid Dynamic Characteristic Analysis of Eccentric Butterfly Valve, The 1st International Conference on Precision Machinery and Manufacturing Technology 2015 (ICPMMT 2015), May 22-24.,
2015 T.-Y. Chan, G.-C. Tsai, C.-K. Fang, Fluid-Structural Coupling Analysis of Small Vertical Wind Turbine, 2015 Conference on Precision Machinery and Manufacturing Technology-PMMT 2015, May 22-24, 2015, G014-1 to G014-7.,
2014 G.C. Tsai, G.J. Guo, and C.K. Fang, Fluid analysis of small wind turbine blades, 2014 Conference on Precision Machinery and Manufacturing Technology-PMMT 2014, Ping-tung, Taiwan, R.O.C., May. 23-25, 2014, pp. J001-1 – J001-5.,
2014 C.-K. Fang, The Mystery of Creatures–An Example of Smart Adhesion in Geckos, Proceedings of the 2014 International Conference on Bible, Science & Education, Taichung, Taiwan, R.O.C., pp. 137-150.,
2013 Jian-Syong Chen, Gwo-Chung Tsai, and Chih-Kuo Fang, Design Optimization of Engine Mount System, 2013 Conference on Precision Machinery and Manufacturing Technology-PMMT 2013, J009-1 to J009-6,
2012 Fang, C.-K., Tribology from The Perspective of Creatures, Proceedings of 2012 International Conference on Bible, Science & Education, Taoyuan, Taiwan, R.O.C., pp. 282-295.,
2010 Fang, C.-K., Biomimetic Tribology and the Mystery of Creatures, Proceedings of the 2010 International Conference on Bible, Science & Education, Hualien, Taiwan, R.O.C., pp. 497-513.,
2003 方治国, 「微机电系统元件之准分子雷射加工」, 九十二年度中华技术学院论文发表研讨会论文集,台北,民国92年4月24日,pp. 201-211,
2000 方治国, 「应用破坏性及非破坏性方法分析复合材料之组成」, 中华技术学院庆祝改制周年论文发表研讨会工业类组论文集,台北,民国89年5月11-12日,pp. 29-38.,
1998 Fang, C.-K. and Lin, W.-M., Investigation on the Deterioration of Building Materials and Analysis of Climatic Factors, Proceedings of the 5th R.O.C. Symposium on Fracture Science, Nantour, Taiwan, R.O.C., March 1998, pp. 433-441,
1998 Fang, C.-K. and Chuang, T.H., Erosive Wear of a Structural Steel, Proceedings of the 15th National Conference of the Chinese Society of Mechanical Engineers, Tainan, Taiwan, R.O.C., Chinese Society of Mechanical Engineers, Nov. 27-28, 1998, pp. 13-20 (Manufacturing and Materials).,
1998 Fang, C.-K. and Chuang, T.H., Determination of Particulate Concentration in Metal Matrix Composites,, Proceedings of the 15th National Conference of the Chinese Society of Mechanical Engineers, Tainan, Taiwan, R.O.C., Chinese Society of Mechanical Engineers, Nov. 27-28, 1998, pp. 151-158 (Manufacturing and Materials).,
1998 Fang, C.-K. and Chuang, T.H., Effects of Eroding Particle Size on the Erosion of 6063 Aluminum Alloy in Different Environmental Conditions, Proceedings of the 1998 Annual Conference of the Chinese Society for Materials Science, Taipei, Taiwan, R.O.C., Chinese Society for Materials Science, Nov. 20-21, 1998, Vol. C, pp. 57-60,
1998 Fang, C.-K. and Chuang, T.H., Corrosive Wear of Alumina Particulate-Reinforced Metal Matrix Composite, Proceedings of the 1998 Annual Conference of the Chinese Society for Materials Science, Taipei, Taiwan, R.O.C., Chinese Society for Materials Science, Nov. 20-21, 1998, Vol. D, 69-72,
1998 Fang, C.-K, Complete-field Acoustic Emission Waveform on a Free Surface for Mixed Fracture Modes, Proceedings of the 22nd National Conference on Theoretical and Applied Mechanics, Tainan, Taiwan, R.O.C., Society of Theoretical and Applied Mechanics, Dec. 19-20, 1998, Vol. 2, pp. 197-204,
1998 Fang, C.-K, Initial Surface Response of Acoustic Emission from Cracking in a Weldment, Proceedings of the 22nd National Conference on Theoretical and Applied Mechanics, Tainan, Taiwan, R.O.C., Society of Theoretical and Applied Mechanics, Dec. 19-20, 1998, Vol. 2, pp. 417-424,
1997 Fang, C.-K, Applications of Acoustic Emission Technology,, Symposium on Nondestructive Testing Technology, Taipei, Taiwan, R.O.C., May 1997, pp. 6-1 to 6-9.,
1996 方治国, 台湾地区影响建材劣化之大气污染物调查, 台湾地区建材耐久性暨标准化研讨会论文集,台北,pp. 57-70.,
1994 Fang, C.-K., Kannatey-Asibu Jr., E., and Barber, J. R., Crack-tip Equation of Motion Due to Non-uniform Residual Stresses in a Weldment,, Proceedings of the First S. M. Wu Symposium on Manufacturing Science, Northwestern University, Evanston, I1., May 27-28, 1994, pp. 261-268.,
1994 Fang, C.-K., Kannatey-Asibu Jr., E, Acoustic Emission from Cracking Due to Welding Residual Stress: I. Theory, Proceedings of the 1994 Far East Conference on Nondestructive Testing (FENDT '94) and ROCSNT 9th Annual Conference, Nov. 3-5, 1994, pp. 457-464,
1994 Fang, C.-K., Kannatey-Asibu Jr., E, Acoustic Emission from Cracking Due to Welding Residual Stress: II. Experiment, Proceedings of the 1994 Far East Conference on Nondestructive Testing (FENDT '94) and ROCSNT 9th Annual Conference, Nov. 3-5, 1994, pp. 465-472.,
1994 Fang, C.-K., Kannatey-Asibu Jr., E, Crack Propagation under Non-uniform Welding Residual Stresses,, Proceedings of the 11th National Conference of the Chinese Society of Mechanical Engineers, Taichung, Taiwan, R.O.C., Chinese Society of Mechanical Engineers, Nov. 1994, pp. 11-20,
1994 Fang, C.-K., Kannatey-Asibu Jr., E.,, Surface Motion from Stress Waves Due to Cracking,, Proceedings of the 18th National Conference on Theoretical and Applied Mechanics, Hsinchu, Taiwan, R.O.C., Society of Theoretical and Applied Mechanics, Dec. 9-10, 1994, pp. 159-166,
年度 计画名称 参与人 职称/担任之工作 计画期间 补助/委讬或合作机构
2017 经济部工业局106年度中小企业即时技术辅导计画「汽车雨刷胶条耐久测试机台改善案」 主持人 2017.05.14 ~ 2017.11.14 经济部&公司
2017 水泥与炉石研磨系统机电控制、诊断、与故障排除 主持人 2017.05.14 ~ 2018.08.14 公司
2016 音洩讯号之解调变 方治国 主持人 2016.10.02 ~ 2017.09.02 公司
2016 雷射复层技术之开发 方治国 主持人 2016.09.02 ~ 2017.08.02 公司
2016 经济部工业局105年度学界协助中小企业科技关怀跨域整合计画:「传统木业转型计画」 主持人 2016.05.02 ~ 2016.10.02 经济部工业局
2016 EPDM胶条之电浆处理 方治国 主持人 2016.03.02 ~ 2017.02.02 公司
2016 亮点计画:「陶木防火材料制程技术之开发」 方治国 主持人 2016.01.02 ~ 2016.12.02 宜兰大学
2015 压力容器之音洩检测 方治国 主持人 2015.10.02 ~ 2015.09.02 公司
2015 经济部104年度学界协助中小企业科技关怀跨域整合计画「耐候型汽车雨刷开发案」 方治国 (C.-K. Fang) 主持人 2015.05.02 ~ 2015.10.02 经济部
2015 经济部工业局104年度中小企业即时技术辅导计画「汽车雨刷摩擦力量测机台之开发」 方治国 主持人 2015.04.02 ~ 2015.09.02 经济部+公司
2015 低摩擦系数雨刷胶条摩擦力测试 方治国 主持人 2015.03.02 ~ 2016.03.02 公司
2015 104年度产业园区厂商升级转型再造计画:「导入学界能量与龙德利泽园区永续经营合作计画」 方治国 顾问 2015.02.02 ~ 2015.11.02 经济部
2014 三维声射定位系统 方治国 主持人 2014.10.02 ~ 2015.09.02 公司
2014 经济部工业局103年度中小企业即时技术辅导计画「汽车雨刷胶条润滑改善案」 方治国 主持人 2014.05.02 ~ 2014.10.02 经济部工业局+公司
2014 学界协助中小企业科技关怀计画:「雨刷性能改善案」 方治国 主持人 2014.05.02 ~ 2014.10.02 经济部工业局
2014 雨刷胶条摩擦力量测系统 方治国 主持人 2014.05.02 ~ 2014.12.02 公司
2014 103年度产业园区厂商升级转型再造计:「学界与龙德利泽园区协力创造永续经营产业」 方治国 顾问 2014.03.02 ~ 2014.11.02 公司
2013 压力容器结构设计 方治国 主持人 2013.08.02 ~ 2014.02.02 弘井机械有限公司
2012 雨刷胶条之性能测试及分析 方治国 主持人 2012.12.02 ~ 2013.08.02 公司
2012 润滑油磨润测试系统 方治国 主持人 2012.08.02 ~ 2013.01.02 公司
2011 100年度绩效型经费—特色教学与研究设施改善与发展计画—子计画「软性电子及太阳能电池教学与研究设施改善与发展计画」 方治国 共同主持人 2011.01.02 ~ 2011.12.02 国立宜兰大学
2011 客车雨刷耐久性及频率测试系统 方治国老师 主持人 2011.01.02 ~ 2011.12.02 公司
2010 99年度工业区厂商转型再造升级计画:绿色环保型涂料之开发 方治国 主持人 2010.12.02 ~ 2011.05.02 经济部
2010 具环保概念之集成材一贯作业自动化制程 方治国 主持人 2010.12.02 ~ 2012.02.02 辳和企业股份有限公司
2010 99年度学界协助中小企业科技关怀计画:集成材一贯作业自动化加工系统 方治国 主持人 2010.07.02 ~ 2010.12.02 经济部
2006 微机电元件之微/奈米磨润研究 (II) 方治国 主持人 国科会
2006 精密机电整合人才培育计画 方治国 主持人 教育部
2005 「精密机电整合人才培育先导型计画」精密检测设备教学资源中心 方治国 主持人 教育部
2005 「微机电元件之微/奈米磨润研究」(NSC 94-2212-E-197-002) 方治国 主持人 国科会
2003 国科会补助提升产业技术及人才培育研究计画(小产学)「精密冲剪模具之磨耗预测」(NSC 92-2622-E-197-003-CC3) 方治国 主持人 国科会
2000 「无铅銲锡球格阵列构装制程与可靠度分析—子计画二 —无铅銲锡球格阵列构装变形之云纹干涉分析」(NSC 89-2216-E-157-004, NSC 90-2216-E-157-001, NSC 91-2216-E-157-002) 方治国 主持人 国科会专题研究计画
1999 「喷砂冲蚀磨耗之温度效应(II)」(NSC 89-2216-E-157-002) 方治国 主持人 国科会专题研究计画
1998 「喷砂冲蚀磨耗之温度效应(I)」(NSC 88-2216-E-157-001) 方治国 主持人 国科会专题研究计画
1997 「以音洩法分析金属基复合材料之磨耗腐蚀机理(II)」(NSC 87-2216-E-157-002) 方治国 主持人 国科会专题研究计画
1997 「精密机械—半导体设备维修科技教育计画」 方治国老师 主持人 教育部技专院校重点产业科技教育计画
1996 「以音洩法分析金属基复合材料之磨耗腐蚀机理(I)」(NSC 86-2216-E-157-001) 方治国老师 主持人 国科会专题研究计画
1996 「Pin-on-Disk 磨耗机之应用技术」(NSC 86-2815-C-157-001-E) 方治国老师 主持人 国科会大专学生参与专题研究计画
1995 「建筑材料耐久性标准化调查研究计画」 方治国老师 主持人 经济部中央标准局
1993 「2mm Program」 方治国老师 研究人员 美国克莱斯勒汽车公司
1987 热辊轮之磨耗腐蚀行为 方治国老师 研究人员 中钢
1984 「铸铁与镀锌钢之磨耗腐蚀研究」(NSC76-0405-008-04 方治国老师 研究人员 国科会
国家 学校名称 系所 学位
美国 美国密西根大学 (University of Michigan, Ann Arbor) 机械工程 博士